In this article we’re going to deal with one more subject in the series on car care. This is the coolant level, and specifically where to put coolant in Dodge Nitro? For this, we will commence this content with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Dodge Nitro? And, finally, how to make the level of this famous liquid.

put-coolant-dodge-nitro

Why to fill coolant level on a Dodge Nitro?

Before we describe where the coolant is on a Dodge Nitro, we commence our content page by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Dodge Nitro has a vital objective in the good performing of your engine unit, in fact, it will circulate in it to capture the heat produced by its operation and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not efficient. Without coolant your engine unit would overheat after only a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level always. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system might be impaired and therefore its performance might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.

Where to put the coolant in Dodge Nitro?

We now proceed to the step that you are most likely most interested in, where to put coolant in Dodge Nitro? You are now informed of the importance of constantly having the ideal level of this coolant. To locate it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Dodge Nitro:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Dodge Nitro, it is generally based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Dodge Nitro?

Now that you have identify where the coolant is in your Dodge Nitro , we will describe how to make the level of it. Nothing could be easier, just stick to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Dodge Nitro the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Dodge Nitro by examining frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Dodge Nitro warms up despite a level coolant, read this content page, you will have the ability to find the causes of this problem.

If you have any further questions about the Dodge Nitro, do not hesitate to consult our Dodge Nitro category.