Today we’re going to discuss one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Chevrolet Spark? For this, we will start this article with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Chevrolet Spark? And, at last, how to make the level of this famous liquid.

put-coolant-chevrolet-spark

Why to fill coolant level on a Chevrolet Spark?

Before we show you where the coolant is on a Chevrolet Spark, we start our content page by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Chevrolet Spark has an important action in the good performing of your engine, the truth is, it will circulate in it to catch the heat made by its operation and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system might be reduced and consequently its effectiveness might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine to break down.

Where to put the coolant in Chevrolet Spark?

We now proceed to the step that you are most certainly most keen on, where to put coolant in Chevrolet Spark? You are now aware of the importance of constantly having the ideal level of this coolant. To locate it is very simple, here are the different steps to allow you to find the expansion tank that contains the coolant of your Chevrolet Spark:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Chevrolet Spark, it is generally found in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Chevrolet Spark?

Now that you have find out where the coolant is in your Chevrolet Spark , we will show you how to make the level of it. Nothing could be simpler, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Chevrolet Spark the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Gently add coolant to the expansion tank of your Chevrolet Spark by looking at frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine, and with a syringe, remove the excess coolant.

If the engine of your Chevrolet Spark warms up despite a level coolant, go through this content page, you will be able to find the causes of this problem.

To find more tips on the Chevrolet Spark, take a look at the Chevrolet Spark category.