Today we’re going to tackle one more theme in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in BMW i3? To do this, we will commence this article content with a little reminder on the benefit of making sure of the coolant level of your motor vehicle, then, where to fill coolant in BMW i3? And, finally, how to make the level of this famous liquid.

put-coolant-bmw-i3

Why to fill coolant level on a BMW i3?

Before we show you where the coolant is on a BMW i3, we commence our article by reminding you what is the benefit of guaranteeing an ideal coolant level ? The coolant of a BMW i3 has an important objective in the good functioning of your engine unit, the truth is, it will circulate in it to capture the heat produced by its procedure and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after only a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the minimal level, the circulation of the coolant in the cooling system might be reduced and therefore its efficiency might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.

Where to put the coolant in BMW i3?

We now proceed to the step that you are almost certainly most enthusiastic about, where to put coolant in BMW i3? You are now aware of the importance of always having the ideal level of this coolant. To find it is very very easy, here are the different steps to allow you to find the expansion tank that contains the coolant of your BMW i3:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly find the expansion tank that contains the coolant of your BMW i3, it is generally based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a BMW i3?

Now that you have identify where the coolant is in your BMW i3 , we will show you how to make the level of it. Nothing could be easier, just stick to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your BMW i3 the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Softly add coolant to the expansion tank of your BMW i3 by checking repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, take out the excess coolant.

If the engine unit of your BMW i3 warms up despite a level coolant, go through this article, you will have the ability to find the causes of this problem.

If you want more guides on the BMW i3, go to our BMW i3 category.