Today we’re going to discuss one more matter in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in BMW 5 Series? For this, we will begin this guideline with a little reminder on the interest of ensuring of the coolant level of your motor vehicle, then, where to fill coolant in BMW 5 Series? And, at last, how to make the level of this famous liquid.


Why to fill coolant level on a BMW 5 Series?

Before we describe where the coolant is on a BMW 5 Series, we begin our content by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a BMW 5 Series has an important action in the good functioning of your engine unit, in reality, it will circulate in it to capture the heat produced by its operation and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system might be reduced and consequently its effectiveness might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.

Where to put the coolant in BMW 5 Series?

We now move on to the step that you are almost certainly most keen on, where to put coolant in BMW 5 Series? You are now conscious of the importance of constantly having the ideal level of this coolant. To locate it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your BMW 5 Series:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly locate the expansion tank that contains the coolant of your BMW 5 Series, it is in most cases based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a BMW 5 Series?

Now that you have identify where the coolant is in your BMW 5 Series , we will describe how to produce the level of it. Nothing could be less complicated, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Verify on the side of the expansion tank of your BMW 5 Series the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Gently add coolant to the expansion tank of your BMW 5 Series by examining regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, take out the excess coolant.

If the engine unit of your BMW 5 Series warms up despite a level coolant, go through this content, you will be able to find the causes of this problem.

To find more tips on the BMW 5 Series, take a look at the BMW 5 Series category.