In this article we’re going to tackle one more topic in the series on car care. This is the coolant level, and specifically where to put coolant in Bmw 1 series? For this, we will start this guideline with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Bmw 1 series? And, finally, how to make the level of this famous liquid.

put-coolant-bmw-1-series

Why to fill coolant level on a Bmw 1 series?

Before we show you where the coolant is on a Bmw 1 series, we start our article by reminding you what is the benefit of guaranteeing an ideal coolant level ? The coolant of a Bmw 1 series has an essential action in the good performing of your engine, in truth, it will circulate in it to capture the heat made by its operation and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system may be impaired and consequently its efficiency may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine to break down.

Where to put the coolant in Bmw 1 series?

We now move on to the step that you are most likely most interested in, where to put coolant in Bmw 1 series? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very simple, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Bmw 1 series:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly identify the expansion tank that contains the coolant of your Bmw 1 series, it is generally based in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Bmw 1 series?

Now that you have find out where the coolant is in your Bmw 1 series , we will show you how to produce the level of it. Nothing could be less complicated, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Verify on the side of the expansion tank of your Bmw 1 series the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Bmw 1 series by checking frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.

If the engine of your Bmw 1 series warms up despite a level coolant, browse this article, you will be able to find the causes of this problem.

To get more tips on the Bmw 1 series, take a look at the Bmw 1 series category.