In this article we’re going to tackle one more theme in the series on car care. This is the coolant level, and specifically where to put coolant in Audi A7? To do this, we will commence this guideline with a little reminder on the benefit of making sure of the coolant level of your car, then, where to fill coolant in Audi A7? And, at last, how to make the level of this famous liquid.

put-coolant-audi-a7

Why to fill coolant level on a Audi A7?

Before we describe where the coolant is on a Audi A7, we commence our article by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Audi A7 has a vital function in the good functioning of your engine unit, in fact, it will circulate in it to catch the heat made by its operation and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after only a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system may be reduced and therefore its efficiency may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.

Where to put the coolant in Audi A7?

We now proceed to the step that you are most likely most keen on, where to put coolant in Audi A7? You are now informed of the importance of constantly having the ideal level of this coolant. To locate it is very very easy, here are the different steps to allow you to find the expansion tank that contains the coolant of your Audi A7:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Audi A7, it is generally located in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Audi A7?

Now that you have identify where the coolant is in your Audi A7 , we will describe how to make the level of it. Nothing could be simpler, just follow the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Audi A7 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Gently add coolant to the expansion tank of your Audi A7 by looking at repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Audi A7 warms up despite a level coolant, read this article, you will have the ability to find the causes of this issue.

If you want more tutorials on the Audi A7, go to our Audi A7 category.