In this article we’re going to discuss one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Audi A1? For this, we will begin this content with a little reminder on the interest of ensuring of the coolant level of your car, then, where to fill coolant in Audi A1? And, at last, how to make the level of this famous liquid.

put-coolant-audi-a1

Why to fill coolant level on a Audi A1?

Before we explain where the coolant is on a Audi A1, we begin our content page by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Audi A1 has a vital function in the good functioning of your engine, in reality, it will circulate in it to capture the heat generated by its operation and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine would overheat after only a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops below the minimal level, the circulation of the coolant in the cooling system may be impaired and therefore its effectiveness may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Audi A1?

We now move on to the step that you are likely most keen on, where to put coolant in Audi A1? You are now aware of the importance of always having the ideal level of this coolant. To find it is very basic, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Audi A1:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly find the expansion tank that contains the coolant of your Audi A1, it is generally based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Audi A1?

Now that you have find out where the coolant is in your Audi A1 , we will explain how to produce the level of it. Nothing could be easier, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Audi A1 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Audi A1 by looking at frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine, and with a syringe, remove the excess coolant.

If the engine of your Audi A1 warms up despite a level coolant, read this content page, you will have the ability to find the causes of this issue.

If you have any additional questions about the Audi A1, do not hesitate to consult our Audi A1 category.