In this article we’re going to talk about one more theme in the series on car care. This is the coolant level, and specifically where to put coolant in Alfa Romeo Mito? To do this, we will begin this guideline with a little reminder on the interest of ensuring of the coolant level of your car, then, where to fill coolant in Alfa Romeo Mito? And, at last, how to make the level of this famous liquid.

put-coolant-alfa-romeo-mito

Why to fill coolant level on a Alfa Romeo Mito?

Before we describe where the coolant is on a Alfa Romeo Mito, we begin our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Alfa Romeo Mito has a vital action in the good performing of your engine, the truth is, it will circulate in it to catch the heat produced by its operation and transfer it to your radiator which has the objective to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system may be impaired and therefore its performance may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Alfa Romeo Mito?

We now proceed to the step that you are most certainly most enthusiastic about, where to put coolant in Alfa Romeo Mito? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very simple, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Alfa Romeo Mito:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly identify the expansion tank that contains the coolant of your Alfa Romeo Mito, it is generally based in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Alfa Romeo Mito?

Now that you have identify where the coolant is in your Alfa Romeo Mito , we will describe how to produce the level of it. Nothing could be less complicated, just follow the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Alfa Romeo Mito the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Alfa Romeo Mito by examining frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, take out the excess coolant.

If the engine of your Alfa Romeo Mito warms up despite a level coolant, read this article, you will have the ability to find the causes of this issue.

If you wish more tutorials on the Alfa Romeo Mito, go to our Alfa Romeo Mito category.