Today we’re going to discuss one more theme in the series on car care. This is the coolant level, and specifically where to put coolant in Alfa Romeo 156? To do this, we will commence this article content with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Alfa Romeo 156? And, finally, how to make the level of this famous liquid.

put-coolant-alfa-romeo-156

Why to fill coolant level on a Alfa Romeo 156?

Before we explain where the coolant is on a Alfa Romeo 156, we commence our article by reminding you what is the benefit of guaranteeing an ideal coolant level ? The coolant of a Alfa Romeo 156 has a vital action in the good functioning of your engine, in reality, it will circulate in it to catch the heat generated by its process and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not efficient. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system might be impaired and consequently its performance might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Alfa Romeo 156?

We now move on to the step that you are almost certainly most enthusiastic about, where to put coolant in Alfa Romeo 156? You are now conscious of the importance of always having the ideal level of this coolant. To identify it is very simple, here are the different steps to allow you to find the expansion tank that contains the coolant of your Alfa Romeo 156:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly identify the expansion tank that contains the coolant of your Alfa Romeo 156, it is usually based in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Alfa Romeo 156?

Now that you have find out where the coolant is in your Alfa Romeo 156 , we will explain how to make the level of it. Nothing could be simpler, just stick to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Alfa Romeo 156 the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Alfa Romeo 156 by examining frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine, and with a syringe, take out the excess coolant.

If the engine of your Alfa Romeo 156 warms up despite a level coolant, browse this article, you will have the ability to find the causes of this issue.

Whenever you have any additional questions about the Alfa Romeo 156, do not hesitate to consult our Alfa Romeo 156 category.