Modern vehicles are more and more built with technology and although this brings us comfort, we regrettably also suffer the cons. The majority of us are uncomfortable with anything electrical on our Jeep Compass, let alone going near the fuses on it. Regrettably, summers are getting hotter and hotter, and some features like air conditioning are indispensable, so an air conditioning failure will inevitably impact the comfort of your vehicle. In this article, we will try to help you to resolve your fuse problems and specifically to find the turn signal fuse on your Jeep Compass. To get this done, first, we will see in which scenarios it might be important to change the turn indicator fuse on your Jeep Compass, then where is the turn signal fuse on Jeep Compass .


Why change blinker fuses on Jeep Compass?

So let’s start our content on the location of theblinker fuse of your Jeep Compass by the interest of changing it. You may possibly feel like your fuse is blown but you are not sure. Obviously, if your turn signal does not work on Jeep Compass anymore, if you have already verify that the bulb isn’t blown, it is highly possible that the fuse is the cause. You should note that a fuse acts as a security device to prevent overvoltage on your Jeep Compass . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and verify that the filament is still intact with a basic visual verify. Generally speaking, you will want to change the turn signal fuse of a Jeep Compass when it doesn’t work anymore for no apparent reason .

Where is the turn signal fuse on Jeep Compass?

We will now look for where the blinker fuse on your Jeep Compass is. The turn indicators are connected to several electronic elements and there might be several fuses connected to it on your motor vehicle based on the year and options it has. On the other hand, furthermore to the fuses, there is also a relay that manages the resolve operation of your air conditioning. We will one after the other help you find the fuse and turn signal relay on your Jeep Compass .

Replacement of the internal turning indicator fuses of your Jeep Compass

We will first concentrate on the internal fuses of your Jeep Compass’s turn signals. For this you will have to go to the fuse box of your car . If you can’t find it, please be aware that it is close to your steering wheel, you will find its exact location thanks to the manual of your Jeep Compass.

  • Read the manual on the cover of the fuse box to find the turn signal fuse(s) of your Jeep Compass , verify all the fuses with the word “lights” in their names.
  • Take out the turn signal fuse(s) attentively with pliers and check the condition of the filament.
  • If one of them fails, change it with a new fuse. As a last solution, you can take your vehicle to your mechanic so that he can take a closer check out the cause of your problem.
  • After you change the turn indicator fuse in your motor vehicle, reassemble and test your lights.

Replacement of the turn signal fuse relay of your Jeep Compass

Finally, we will now see how to verify the status of the blinker relay in your motor vehicle. To get this done, you will need to go to your engine unit compartment side:

  • Open the fuse box of your Jeep Compass, it’s close to your battery under a plastic cover.
  • Check the inside of the cover for the location of the turn signal relay, or verify your instruction manual if you can’t find it. This is usually the air conditioning compressor relay.
  • Reverse the relay with another relay to test your turning lights, or change it with a new one

You now know how to find the turn signal fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Jeep Compass, or the horn fuse, do not hesitate to consult our content articles dedicated to these fuses.

To discover more tips on the Jeep Compass, take a look at the Jeep Compass category.