Modern cars are more and more equipped with technology and nevertheless this brings us comfort, we regrettably as well suffer the down sides. The majority of us are not comfortable with anything electrical on our Hyundai Ix35, let alone going near the fuses on it. Regrettably, summers are getting hotter and hotter, and some options like air conditioning are indispensable, so an air conditioning failure will unavoidably impact the comfort of your vehicle. In this article, we will try to help you to fix your fuse problems and specifically to locate the turn signal fuse on your Hyundai Ix35. To get this done, first, we will see in which circumstances it might be important to change the turn indicator fuse on your Hyundai Ix35, then where is the turn signal fuse on Hyundai Ix35 .


Why replace blinker fuses on Hyundai Ix35?

So let’s start our content on the location of theblinker fuse of your Hyundai Ix35 by the benefit of changing it. You may feel like your fuse is blown but you are not sure. In truth, if your turn signal does not work on Hyundai Ix35 anymore, if you have already check that the bulb isn’t blown, it is highly possible that the fuse is the cause. You should know that a fuse acts as a security device to prevent overvoltage on your Hyundai Ix35 . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a very easy visual check. Generally, you will want to replace the turn signal fuse of a Hyundai Ix35 when it doesn’t work anymore for no apparent cause .

Where is the turn signal fuse on Hyundai Ix35?

We will now look for where the blinker fuse on your Hyundai Ix35 is. The turn indicators are connected to some electronic elements and there might be some fuses connected to it on your motor vehicle depending on the year and options it has. Nevertheless, in addition to the fuses, there is as well a relay that handles the resolve operation of your air conditioning. We will one after the other help you locate the fuse and turn signal relay on your Hyundai Ix35 .

Replacement of the internal turning indicator fuses of your Hyundai Ix35

We will first concentrate on the internal fuses of your Hyundai Ix35’s turn signs. For this you will have to go to the fuse box of your car . If you can’t locate it, please note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Hyundai Ix35.

  • Go through the manual on the cover of the fuse box to locate the turn signal fuse(s) of your Hyundai Ix35 , check all the fuses with the word “lights” in their names.
  • Remove the turn signal fuse(s) carefully with pliers and check the condition of the filament.
  • If one of them fails, replace it with a new fuse. As a last solution, you can take your vehicle to your technician so that he can take a closer look at the cause of your problem.
  • After you change the turn indicator fuse in your motor vehicle, reassemble and test your lights.

Replacement of the turn signal fuse relay of your Hyundai Ix35

Finally, we will now see how to check the status of the blinker relay in your motor vehicle. To get this done, you will need to go to your engine unit compartment side:

  • Open the fuse box of your Hyundai Ix35, it’s close to your battery under a plastic cover.
  • Verify the inside of the cover for the location of the turn signal relay, or check your instruction manual if you can’t find it. This is in most cases the air conditioning compressor relay.
  • Reverse the relay with another relay to test your turning lights, or replace it with a new one

You now know how to find the turn signal fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Hyundai Ix35, or the horn fuse, do not think twice to seek advice from our content articles dedicated to these fuses.

If you need more tutorials on the Hyundai Ix35, go to our Hyundai Ix35 category.