Modern vehicles are more and more built with technology and nevertheless this brings us comfort, we regrettably also suffer the down sides. The majority of us are uncomfortable with anything electrical on our Ford Ranger, let alone going near the fuses on it. Sadly, summers are getting hotter and hotter, and some features like air conditioning are indispensable, so an air conditioning failure will inevitably impact the comfort of your car. In this article, we will try to help you to solve your fuse problems and especially to locate the turn signal fuse on your Ford Ranger. To achieve this, first, we will find out in which circumstances it may be relevant to change the turn indicator fuse on your Ford Ranger, then where is the turn signal fuse on Ford Ranger .
Why replace blinker fuses on Ford Ranger?
.
So let’s start our content on the location of theblinker fuse of your Ford Ranger by the interest of changing it. You might feel like your fuse is blown but you are not sure. Obviously, if your turn signal does not work on Ford Ranger anymore, if you have already check that the bulb isn’t blown, it is highly possible that the fuse is the cause. You should note that a fuse acts as a safety unit to prevent overvoltage on your Ford Ranger . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a basic visual check. In general, you will want to replace the turn signal fuse of a Ford Ranger when it doesn’t work anymore for no apparent cause .
Where is the turn signal fuse on Ford Ranger?
We will now look for where the blinker fuse on your Ford Ranger is. The turn indicators are linked to some electronic components and there may be some fuses linked to it on your car based on the year and options it has. Nevertheless, in addition to the fuses, there is also a relay that controls the solve operation of your air conditioning. We will one by one help you locate the fuse and turn signal relay on your Ford Ranger .
Replacement of the internal turning indicator fuses of your Ford Ranger
.
We will first concentrate on the internal fuses of your Ford Ranger’s turn signals. For this you will have to go to the fuse box of your car . If you can’t locate it, please note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Ford Ranger.
- Browse the instruction manual on the cover of the fuse box to locate the turn signal fuse(s) of your Ford Ranger , check all the fuses with the word “lights” in their names.
- Take out the turn signal fuse(s) attentively with pliers and check the state of the filament.
- If one of them fails, change it with a new fuse. As a last remedy, you can take your car to your auto technician so that he can take a closer look at the cause of your problem.
- After you change the turn indicator fuse in your car, reassemble and test your lights.
Replacement of the turn signal fuse relay of your Ford Ranger
Finally, we will now find out how to check the status of the blinker relay in your car. To achieve this, you will need to go to your engine compartment side:
- Open the fuse box of your Ford Ranger, it’s close to your battery under a plastic cover.
- Verify the inside of the cover for the location of the turn signal relay, or check your instruction manual if you can’t find it. This is usually the air conditioning compressor relay.
- Reverse the relay with another relay to test your turning lights, or change it with a new one
You now know how to find the turn signal fuse of your car , if you are in search of other fuses like the starter fuse on Ford Ranger, or the horn fuse, do not hesitate to seek advice from our content articles dedicated to these fuses.
To get more tips on the Ford Ranger, take a look at the Ford Ranger category.
