Modern vehicles are more and more equipped with technology and although this brings us comfort, we unfortunately also undergo the down sides. Most of us are not comfortable with anything electrical on our Fiat Bravo, let alone going near the fuses on it. Sadly, summers are getting hotter and hotter, and some options like air conditioning are indispensable, so an air conditioning failure will undoubtedly impact the comfort of your car. In this article, we will try to help you to resolve your fuse problems and especially to discover the turn signal fuse on your Fiat Bravo. To achieve this, first, we will find out in which circumstances it might be important to change the turn indicator fuse on your Fiat Bravo, then where is the turn signal fuse on Fiat Bravo .
Why change blinker fuses on Fiat Bravo?
.
So let’s start our content page on the location of theblinker fuse of your Fiat Bravo by the interest of changing it. You may feel like your fuse is blown but you are not sure. Obviously, if your turn signal does not work on Fiat Bravo anymore, if you have already check that the bulb isn’t blown, it is highly possible that the fuse is the trigger. You should note that a fuse acts as a security device to prevent overvoltage on your Fiat Bravo . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a basic visual check. Generally, you will want to change the turn signal fuse of a Fiat Bravo when it doesn’t work anymore for no apparent cause .
Where is the turn signal fuse on Fiat Bravo?
We will now look for where the blinker fuse on your Fiat Bravo is. The turn indicators are linked to some electronic components and there might be some fuses linked to it on your car based on the year and options it has. However, in addition to the fuses, there is also a relay that manages the correct operation of your air conditioning. We will one after the other help you discover the fuse and turn signal relay on your Fiat Bravo .
Replacement of the internal turning indicator fuses of your Fiat Bravo
.
We will first look into the internal fuses of your Fiat Bravo’s turn signs. For this you will have to go to the fuse box of your car . If you can’t discover it, please be aware that it is close to your steering wheel, you will discover its exact location thanks to the manual of your Fiat Bravo.
- Read the owners manual on the cover of the fuse box to discover the turn signal fuse(s) of your Fiat Bravo , check all the fuses with the word “lights” in their names.
- Remove the turn signal fuse(s) carefully with pliers and check the state of the filament.
- If one of them breaks down, change it with a new fuse. As a last solution, you can take your car to your mechanic so that he can take a closer check out the trigger of your problem.
- After you change the turn indicator fuse in your car, reassemble and test your lights.
Replacement of the turn signal fuse relay of your Fiat Bravo
Finally, we will now find out how to check the status of the blinker relay in your car. To achieve this, you will need to go to your engine compartment side:
- Open the fuse box of your Fiat Bravo, it’s close to your battery under a plastic cover.
- Verify the inside of the cover for the location of the turn signal relay, or check your instruction manual if you can’t find it. This is usually the air conditioning compressor relay.
- Reverse the relay with another relay to test your turning lights, or change it with a new one
You now know how to find the turn signal fuse of your car , if you are looking for other fuses like the starter fuse on Fiat Bravo, or the horn fuse, do not hesitate to consult our web content dedicated to these fuses.
If you need more tutorials on the Fiat Bravo, go to our Fiat Bravo category.
