Modern cars are more and more equipped with technology and although this brings us comfort, we unfortunately also undergo the drawbacks. Most of us are uncomfortable with anything electrical on our Fiat 500, let alone going near the fuses on it. Unfortunately, summers are getting hotter and hotter, and some features like air conditioning are indispensable, so an air conditioning failure will obviously impact the comfort of your vehicle. In this post, we will try to help you to solve your fuse problems and especially to locate the turn signal fuse on your Fiat 500. To achieve this, first, we will find out in which circumstances it may be relevant to change the turn indicator fuse on your Fiat 500, then where is the turn signal fuse on Fiat 500 .
Why change blinker fuses on Fiat 500?
.
So let’s start our article on the location of theblinker fuse of your Fiat 500 by the interest of changing it. You might feel like your fuse is blown but you are not sure. Obviously, if your turn signal does not work on Fiat 500 anymore, if you have already verify that the bulb isn’t blown, it is highly possible that the fuse is the cause. You should know that a fuse acts as a safety unit to prevent overvoltage on your Fiat 500 . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and verify that the filament is still intact with a very easy visual verify. Generally, you will want to change the turn signal fuse of a Fiat 500 when it doesn’t work anymore for no apparent explanation .
Where is the turn signal fuse on Fiat 500?
We will now look for where the blinker fuse on your Fiat 500 is. The turn indicators are linked to several electronic elements and there may be several fuses linked to it on your motor vehicle depending on the year and options it has. On the other hand, in addition to the fuses, there is also a relay that handles the correct operation of your air conditioning. We will one at a time help you locate the fuse and turn signal relay on your Fiat 500 .
Replacement of the internal turning indicator fuses of your Fiat 500
.
We will first focus on the internal fuses of your Fiat 500’s turn signals. For this you will have to go to the fuse box of your car . If you can’t locate it, take note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Fiat 500.
- Read the owners manual on the cover of the fuse box to locate the turn signal fuse(s) of your Fiat 500 , verify all the fuses with the word “lights” in their names.
- Remove the turn signal fuse(s) carefully with pliers and check the condition of the filament.
- If one of them fails, change it with a new fuse. As a last solution, you can take your vehicle to your auto mechanic so that he can take a closer look at the cause of your problem.
- After you change the turn indicator fuse in your motor vehicle, reassemble and test your lights.
Replacement of the turn signal fuse relay of your Fiat 500
Finally, we will now find out how to verify the status of the blinker relay in your motor vehicle. To achieve this, you will need to go to your engine unit compartment side:
- Open the fuse box of your Fiat 500, it’s close to your battery under a plastic cover.
- Verify the inside of the cover for the location of the turn signal relay, or verify your instruction manual if you can’t find it. This is generally the air conditioning compressor relay.
- Reverse the relay with another relay to test your turning lights, or change it with a new one
You now know how to find the turn signal fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Fiat 500, or the horn fuse, do not hesitate to seek advice from our content articles dedicated to these fuses.
Whenever you have any additional questions about the Fiat 500, do not hesitate to consult our Fiat 500 category.
