Modern vehicles are more and more built with technology and although this brings us comfort, we regrettably as well go through the cons. The majority of us are uncomfortable with anything electrical on our Subaru Legacy, let alone going near the fuses on it. In this post, we are going to try to help you to fix your fuse problems and specifically to locate the power window fuse on your Subaru Legacy. To do this, first, we are going to find out in which scenarios it can be important to replace the window fuse of your Subaru Legacy, then where the window fuse of your Subaru Legacy is.


Why replace the power window fuse on your Subaru Legacy?

So let’s start our guideline on the location of the window lifter fuse of your Subaru Legacy by the interest of changing it. You may possibly have the feeling that your fuse is blown but you are not sure. In fact, if you have problems with your motor vehicle window, whether it is blocked, or the power window of your Subaru Legacy no longer lifts , it is strongly possible that the fuse is the trigger. It is essential to know that a fuse acts as a security device to avoid any overvoltage on your Subaru Legacy . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and check that the filament is still intact with a very easy visual verify. In general, you will want to replace the fuse of the window lifter of an Subaru Legacy when the power window no longer works . If your battery is functioning properly, it may be the fuse that is the trigger of your problem.

Where is the window winder fuse on Subaru Legacy?

We will now search for the fuse in the power window of your Subaru Legacy . It will often blow if your window gets stuck. The fuse is in most cases a 30 amp fuse. We will help you locate the power window fuse on your Subaru Legacy .

Placement of the power window fuse of your Subaru Legacy

We will first concentrate on the power window fuse on your Subaru Legacy. For this you will have to go to the fuse box of your motor vehicle . If you can’t locate it, please note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Subaru Legacy.

  • Read the owners manual on the cover of the fuse box to locate the window fuse on your Subaru Legacy , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question carefully with pliers and check the state of the filament.
  • If it is defective, replace it with a new fuse, in any other case you will have to check the state of your Subaru Legacy window lift motor, or the power cables.
  • After you replace your motor vehicle window fuse, put it back together and test your windows.

How to proceed if the power window fuse on my Subaru Legacy blows after changing?

Finally, we will now find out what to do if the window lift fuse of your Subaru Legacy is blown after replacement . Here are a few points to verify yourself if you are able to do it, in any other case take your vehicle to your mechanic.

  • Remove your door trim
  • .

  • Verify to find out if your fuse blows as soon as it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

You now know how to find the window lift fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Subaru Legacy, or the air conditioning fuse, don’t think twice to consult our content articles dedicated to these fuses.

If you have any additional questions about the Subaru Legacy, do not hesitate to consult our Subaru Legacy category.