Modern cars are more and more built with technology and nevertheless this brings us comfort, we however also suffer the drawbacks. Most of us are uncomfortable with anything electrical on our Skoda Enyaq, let alone going near the fuses on it. In this post, we are going to try to help you to fix your fuse complications and especially to find the power window fuse on your Skoda Enyaq. To accomplish this, first, we are going to discover in which scenarios it can be relevant to change the window fuse of your Skoda Enyaq, then where the window fuse of your Skoda Enyaq is.

power-window-fuse-skoda-enyaq

Why change the power window fuse on your Skoda Enyaq?

So let’s begin our content page on the location of the window lifter fuse of your Skoda Enyaq by the significance of changing it. You may possibly have the feeling that your fuse is blown but you are not sure. In actual fact, if you have complications with your car window, if it is stuck, or the power window of your Skoda Enyaq no longer lifts , it is highly possible that the fuse is the trigger. It is necessary to know that a fuse acts as a security device to avoid any overvoltage on your Skoda Enyaq . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and check that the filament is still intact with a basic visual check. In general, you will want to change the fuse of the window lifter of an Skoda Enyaq when the power window no longer works . If your battery is working properly, it may be the fuse that is the trigger of your problem.

Where is the window winder fuse on Skoda Enyaq?

We will now try to find the fuse in the power window of your Skoda Enyaq . It will often blow if your window gets stuck. The fuse is generally a 30 amp fuse. We will help you find the power window fuse on your Skoda Enyaq .

Location of the power window fuse of your Skoda Enyaq

.
We will first focus on the power window fuse on your Skoda Enyaq. For this you will have to go to the fuse box of your car . If you can’t find it, take note that it is close to your steering wheel, you will find its exact location thanks to the manual of your Skoda Enyaq.

  • Browse the manual on the cover of the fuse box to find the window fuse on your Skoda Enyaq , it should be noted as “power window”/”window lift control”.
  • Take out the fuse in question cautiously with pliers and check the state of the filament.
  • If it is defective, replace it with a new fuse, in any other case you will have to check the state of your Skoda Enyaq window lift motor, or the power cables.
  • After you change your car window fuse, put it back together and test your windows.

How to handle it if the power window fuse on my Skoda Enyaq blows after changing?

At last, we will now discover what to do if the window lift fuse of your Skoda Enyaq is blown after replacement . Here are a few points to check yourself if you are capable to do it, in any other case take your vehicle to your mechanic.

  • Take out your door trim
  • .

  • Verify to discover if your fuse blows when it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your car , if you are trying to find other fuses like the starter fuse on Skoda Enyaq, or the air conditioning fuse, don’t hesitate to consult our articles dedicated to these fuses.

To get more tips on the Skoda Enyaq, take a look at the Skoda Enyaq category.