Modern vehicles are more and more built with technology and although this brings us comfort, we unfortunately also go through the down sides. Most of us are not comfortable with anything electrical on our Peugeot 306, let alone going near the fuses on it. In this post, we are going to try to help you to solve your fuse problems and especially to find the power window fuse on your Peugeot 306. To get this done, first, we are going to see in which scenarios it can be relevant to change the window fuse of your Peugeot 306, then where the window fuse of your Peugeot 306 is.

power-window-fuse-peugeot-306

Why change the power window fuse on your Peugeot 306?

So let’s start our content page on the location of the window lifter fuse of your Peugeot 306 by the benefit of changing it. You may possibly have the impression that your fuse is blown but you are not sure. In actual fact, if you have problems with your car window, whether it is blocked, or the power window of your Peugeot 306 no longer lifts , it is highly possible that the fuse is the trigger. It is important to know that a fuse works as a safety device to avoid any overvoltage on your Peugeot 306 . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and examine that the filament is still intact with a basic visual verify. Generally, you will want to change the fuse of the window lifter of an Peugeot 306 when the power window no longer works . If your battery is working properly, it may be the fuse that is the trigger of your problem.

Where is the window winder fuse on Peugeot 306?

We will now search for the fuse in the power window of your Peugeot 306 . It will frequently blow if your window gets stuck. The fuse is usually a 30 amp fuse. We will help you find the power window fuse on your Peugeot 306 .

Location of the power window fuse of your Peugeot 306

.
We will first concentrate on the power window fuse on your Peugeot 306. For this you will have to go to the fuse box of your car . If you can’t find it, please be aware that it is close to your steering wheel, you will find its exact location thanks to the manual of your Peugeot 306.

  • Read the manual on the cover of the fuse box to find the window fuse on your Peugeot 306 , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question attentively with pliers and check the state of the filament.
  • If it is defective, replace it with a new fuse, in any other case you will have to verify the state of your Peugeot 306 window lift motor, or the power cables.
  • After you change your car window fuse, put it back together and test your windows.

What to do if the power window fuse on my Peugeot 306 blows after changing?

Finally, we will now see what to do if the window lift fuse of your Peugeot 306 is blown after replacement . Here are a few points to verify yourself if you are capable to do it, in any other case take your car to your garage area.

  • Remove your door trim
  • .

  • Check to see if your fuse blows once it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your car , if you are looking for other fuses like the starter fuse on Peugeot 306, or the air conditioning fuse, don’t think twice to consult our content articles dedicated to these fuses.

If you need more guides on the Peugeot 306, go to our Peugeot 306 category.