Modern cars are more and more built with technology and although this brings us comfort, we however as well go through the drawbacks. Most of us are not comfortable with anything electrical on our Nissan Pulsar, let alone going near the fuses on it. In this post, we are going to try to help you to solve your fuse problems and especially to find the power window fuse on your Nissan Pulsar. To achieve this, first, we are going to discover in which scenarios it can be important to replace the window fuse of your Nissan Pulsar, then where the window fuse of your Nissan Pulsar is.

power-window-fuse-nissan-pulsar

Why replace the power window fuse on your Nissan Pulsar?

So let’s start our article on the location of the window lifter fuse of your Nissan Pulsar by the significance of changing it. You may have the impression that your fuse is blown but you are not sure. Obviously, if you have problems with your motor vehicle window, if it is blocked, or the power window of your Nissan Pulsar no longer lifts , it is highly possible that the fuse is the trigger. It is important to know that a fuse acts as a security device to avoid any overvoltage on your Nissan Pulsar . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a basic visual check. In general, you will want to replace the fuse of the window lifter of an Nissan Pulsar when the power window no longer works . If your battery is operating effectively, it might be the fuse that is the trigger of your problem.

Where is the window winder fuse on Nissan Pulsar?

We will now search for the fuse in the power window of your Nissan Pulsar . It will often blow if your window gets stuck. The fuse is in general a 30 amp fuse. We will help you discover the power window fuse on your Nissan Pulsar .

Placement of the power window fuse of your Nissan Pulsar

.
We will first focus on the power window fuse on your Nissan Pulsar. For this you will have to go to the fuse box of your motor vehicle . If you can’t discover it, please be aware that it is close to your steering wheel, you will discover its exact location thanks to the manual of your Nissan Pulsar.

  • Browse the manual on the cover of the fuse box to discover the window fuse on your Nissan Pulsar , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question carefully with pliers and check the state of the filament.
  • If it is faulty, replace it with a new fuse, otherwise you will have to check the state of your Nissan Pulsar window lift motor, or the power cables.
  • After you replace your motor vehicle window fuse, put it back together and test your windows.

What to do if the power window fuse on my Nissan Pulsar blows after changing?

At last, we will now discover what to do if the window lift fuse of your Nissan Pulsar is blown after replacement . Here are a few points to check yourself if you are able to do it, otherwise take your vehicle to your garage area.

  • Remove your door trim
  • .

  • Verify to discover if your fuse blows once it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your motor vehicle , if you are looking for other fuses like the starter fuse on Nissan Pulsar, or the air conditioning fuse, don’t hesitate to consult our articles dedicated to these fuses.

To discover more tips on the Nissan Pulsar, take a look at the Nissan Pulsar category.