Modern vehicles are more and more built with technology and although this brings us comfort, we sadly as well suffer the drawbacks. Most of us are uncomfortable with anything electrical on our Jeep Grand Cherokee, let alone going near the fuses on it. In this post, we are going to try to help you to solve your fuse problems and specifically to find the power window fuse on your Jeep Grand Cherokee. To get this done, first, we are going to find out in which scenarios it can be important to replace the window fuse of your Jeep Grand Cherokee, then where the window fuse of your Jeep Grand Cherokee is.

power-window-fuse-jeep-grand-cherokee

Why replace the power window fuse on your Jeep Grand Cherokee?

So let’s start our guideline on the location of the window lifter fuse of your Jeep Grand Cherokee by the significance of changing it. You might have the feeling that your fuse is blown but you are not sure. In fact, if you have problems with your car window, if it is blocked, or the power window of your Jeep Grand Cherokee no longer lifts , it is strongly possible that the fuse is the cause. It is important to know that a fuse works as a security device to avoid any overvoltage on your Jeep Grand Cherokee . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a very easy visual check. Generally, you will want to replace the fuse of the window lifter of an Jeep Grand Cherokee when the power window no longer functions . If your battery is operating effectively, it may be the fuse that is the cause of your problem.

Where is the window winder fuse on Jeep Grand Cherokee?

We will now search for the fuse in the power window of your Jeep Grand Cherokee . It will frequently blow if your window gets stuck. The fuse is in most cases a 30 amp fuse. We will help you discover the power window fuse on your Jeep Grand Cherokee .

Placement of the power window fuse of your Jeep Grand Cherokee

.
We will first focus on the power window fuse on your Jeep Grand Cherokee. For this you will have to go to the fuse box of your car . If you can’t discover it, please be aware that it is close to your steering wheel, you will discover its exact location thanks to the manual of your Jeep Grand Cherokee.

  • Read the manual on the cover of the fuse box to discover the window fuse on your Jeep Grand Cherokee , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question cautiously with pliers and check the state of the filament.
  • If it is faulty, replace it with a new fuse, otherwise you will have to examine the state of your Jeep Grand Cherokee window lift motor, or the power cables.
  • After you replace your car window fuse, put it back together and test your windows.

How to handle it if the power window fuse on my Jeep Grand Cherokee blows after changing?

At last, we will now find out how to proceed if the window lift fuse of your Jeep Grand Cherokee is blown after replacement . Here are a few points to check yourself if you are capable to do it, otherwise take your vehicle to your garage.

  • Remove your door trim
  • .

  • Verify to find out if your fuse blows as soon as it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your car , if you are in search of other fuses like the starter fuse on Jeep Grand Cherokee, or the air conditioning fuse, don’t think twice to consult our content articles dedicated to these fuses.

To discover more tips on the Jeep Grand Cherokee, take a look at the Jeep Grand Cherokee category.