Modern vehicles are more and more equipped with technology and nevertheless this brings us comfort, we unfortunately as well suffer the drawbacks. The majority of us are not comfortable with anything electrical on our Hyundai Bayon, let alone going near the fuses on it. In this article, we are going to try to help you to resolve your fuse complications and specifically to locate the power window fuse on your Hyundai Bayon. To accomplish this, first, we are going to see in which circumstances it can be important to change the window fuse of your Hyundai Bayon, then where the window fuse of your Hyundai Bayon is.

power-window-fuse-hyundai-bayon

Why change the power window fuse on your Hyundai Bayon?

So let’s begin our guideline on the location of the window lifter fuse of your Hyundai Bayon by the interest of changing it. You may possibly have the feeling that your fuse is blown but you are not sure. In fact, if you have complications with your car window, whether it is blocked, or the power window of your Hyundai Bayon no longer lifts , it is highly possible that the fuse is the trigger. It is essential to know that a fuse operates as a safety device to avoid any overvoltage on your Hyundai Bayon . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and examine that the filament is still intact with a basic visual verify. Generally speaking, you will want to change the fuse of the window lifter of an Hyundai Bayon when the power window no longer works . If your battery is working properly, it might be the fuse that is the trigger of your problem.

Where is the window winder fuse on Hyundai Bayon?

We will now search for the fuse in the power window of your Hyundai Bayon . It will often blow if your window gets stuck. The fuse is usually a 30 amp fuse. We will help you find the power window fuse on your Hyundai Bayon .

Position of the power window fuse of your Hyundai Bayon

.
We will first focus on the power window fuse on your Hyundai Bayon. For this you will have to go to the fuse box of your car . If you can’t find it, take note that it is close to your steering wheel, you will find its exact location thanks to the manual of your Hyundai Bayon.

  • Browse the instruction manual on the cover of the fuse box to find the window fuse on your Hyundai Bayon , it should be noted as “power window”/”window lift control”.
  • Take out the fuse in question cautiously with pliers and check the state of the filament.
  • If it is faulty, change it with a new fuse, otherwise you will have to verify the state of your Hyundai Bayon window lift motor, or the power cables.
  • After you change your car window fuse, put it back together and test your windows.

How to proceed if the power window fuse on my Hyundai Bayon blows after changing?

Finally, we will now see how to handle it if the window lift fuse of your Hyundai Bayon is blown after replacement . Here are a few points to verify yourself if you are able to do it, otherwise take your vehicle to your garage.

  • Take out your door trim
  • .

  • Verify to see if your fuse blows once it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your car , if you are looking for other fuses like the starter fuse on Hyundai Bayon, or the air conditioning fuse, don’t think twice to consult our content articles dedicated to these fuses.

If perhaps you have any further questions about the Hyundai Bayon, do not hesitate to consult our Hyundai Bayon category.