Modern vehicles are more and more built with technology and nevertheless this brings us comfort, we sadly as well undergo the drawbacks. Most of us are not comfortable with anything electrical on our Ford Crown Victoria, let alone going near the fuses on it. In this post, we are going to try to help you to resolve your fuse problems and especially to find the power window fuse on your Ford Crown Victoria. To achieve this, first, we are going to find out in which situations it can be important to change the window fuse of your Ford Crown Victoria, then where the window fuse of your Ford Crown Victoria is.

power-window-fuse-ford-crown-victoria

Why change the power window fuse on your Ford Crown Victoria?

So let’s start our article on the location of the window lifter fuse of your Ford Crown Victoria by the significance of changing it. You may have the feeling that your fuse is blown but you are not sure. In fact, if you have problems with your motor vehicle window, if it is blocked, or the power window of your Ford Crown Victoria no longer lifts , it is strongly possible that the fuse is the trigger. It is important to know that a fuse works as a safety device to avoid any overvoltage on your Ford Crown Victoria . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and verify that the filament is still intact with a basic visual verify. In general, you will want to change the fuse of the window lifter of an Ford Crown Victoria when the power window no longer works . If your battery is operating effectively, it may be the fuse that is the trigger of your problem.

Where is the window winder fuse on Ford Crown Victoria?

We will now try to find the fuse in the power window of your Ford Crown Victoria . It will very often blow if your window gets stuck. The fuse is generally a 30 amp fuse. We will help you find the power window fuse on your Ford Crown Victoria .

Placement of the power window fuse of your Ford Crown Victoria

.
We will first focus on the power window fuse on your Ford Crown Victoria. For this you will have to go to the fuse box of your motor vehicle . If you can’t find it, take note that it is close to your steering wheel, you will find its exact location thanks to the manual of your Ford Crown Victoria.

  • Read the instruction manual on the cover of the fuse box to find the window fuse on your Ford Crown Victoria , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question carefully with pliers and check the condition of the filament.
  • If it is faulty, change it with a new fuse, otherwise you will have to check the state of your Ford Crown Victoria window lift motor, or the power cables.
  • After you change your motor vehicle window fuse, put it back together and test your windows.

What to do if the power window fuse on my Ford Crown Victoria blows after changing?

At last, we will now find out how to handle it if the window lift fuse of your Ford Crown Victoria is blown after replacement . Here are a few points to verify yourself if you are capable to do it, otherwise take your car to your garage.

  • Remove your door trim
  • .

  • Check to find out if your fuse blows once it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your motor vehicle , if you are in search of other fuses like the starter fuse on Ford Crown Victoria, or the air conditioning fuse, don’t hesitate to consult our content articles dedicated to these fuses.

If you want more tutorials on the Ford Crown Victoria, go to our Ford Crown Victoria category.