Modern vehicles are more and more equipped with technology and nevertheless this brings us comfort, we sadly as well suffer the down sides. Most of us are uncomfortable with anything electrical on our Buick Enclave, let alone going near the fuses on it. In this article, we are going to try to help you to resolve your fuse complications and especially to find the power window fuse on your Buick Enclave. To do this, first, we are going to see in which scenarios it can be relevant to replace the window fuse of your Buick Enclave, then where the window fuse of your Buick Enclave is.

power-window-fuse-buick-enclave

Why replace the power window fuse on your Buick Enclave?

So let’s start our guideline on the location of the window lifter fuse of your Buick Enclave by the significance of changing it. You may have the feeling that your fuse is blown but you are not sure. In fact, if you have complications with your car window, if it is stuck, or the power window of your Buick Enclave no longer lifts , it is firmly possible that the fuse is the cause. It is essential to know that a fuse operates as a security device to avoid any overvoltage on your Buick Enclave . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a basic visual check. In general, you will want to replace the fuse of the window lifter of an Buick Enclave when the power window no longer functions . If your battery is functioning effectively, it might be the fuse that is the cause of your problem.

Where is the window winder fuse on Buick Enclave?

We will now search for the fuse in the power window of your Buick Enclave . It will very often blow if your window gets stuck. The fuse is in general a 30 amp fuse. We will help you locate the power window fuse on your Buick Enclave .

Location of the power window fuse of your Buick Enclave

.
We will first focus on the power window fuse on your Buick Enclave. For this you will have to go to the fuse box of your car . If you can’t locate it, please note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Buick Enclave.

  • Browse the instruction manual on the cover of the fuse box to locate the window fuse on your Buick Enclave , it should be noted as “power window”/”window lift control”.
  • Remove the fuse in question attentively with pliers and check the condition of the filament.
  • If it is defective, replace it with a new fuse, otherwise you will have to examine the state of your Buick Enclave window lift motor, or the power cables.
  • After you replace your car window fuse, put it back together and test your windows.

How to proceed if the power window fuse on my Buick Enclave blows after changing?

Finally, we will now see how to handle it if the window lift fuse of your Buick Enclave is blown after replacement . Here are a few points to check yourself if you are capable to do it, otherwise take your vehicle to your mechanic.

  • Remove your door trim
  • .

  • Verify to see if your fuse blows as soon as it is changed or when you operate your power window.
  • If it blows without you handling it, look for a short in the beam that handles this fuse
  • If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim

.
You now know how to find the window lift fuse of your car , if you are looking for other fuses like the starter fuse on Buick Enclave, or the air conditioning fuse, don’t hesitate to seek advice from our content articles dedicated to these fuses.

To find more tips on the Buick Enclave, take a look at the Buick Enclave category.