Modern cars are progressively more built with technology and although this gives us comfort, we however also undergo the disadvantages. The majority of us are not comfortable with anything electrical on our Mercedes Cla, let alone going near the fuses on it. In this article, we will try to help you to solve your fuse problems and specifically to locate the fuse of the airbag on your Mercedes Cla. To get this done, first, we will see in which scenarios it can be significant to change the fuse of the airbag of your Mercedes Cla, then where is the fuse of the airbag of your Mercedes Cla .

airbag-fuse-mercedes-cla

Why change the airbag fuse on Mercedes Cla?

.
So let’s start our content page on the location of the airbag fuse of your Mercedes Cla by the benefit of changing it. You may have the impression that your fuse is blown but you are not sure. If you discover an airbag light warning on your dash, it is very possible that the fuse is the trigger. It is essential to know that a fuse works as a safety system to prevent overvoltage on your Mercedes Cla . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can verify them and examine that the filament is still intact with a simple visual verify. In general, one will want to change the fuse of the airbag of a Mercedes Cla when they don’t operate anymore without reason . If your battery is functioning effectively, it may be the fuse that is producing your issue.

Where is the fuse for the airbag on Mercedes Cla?

.
We will now look for the fuse for the airbag in your Mercedes Cla. The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that manages the proper operation of your airbag. We will take it in turns to help you to locate the fuse for the airbag of your Mercedes Cla .

Replacement of the inner fuse of the airbag of your Mercedes Cla

.
We will first focus on the inner fuse of your Mercedes Cla’s airbag. To do this you will have to go to the fuse box of your motor vehicle . If you can’t locate it, know that it is close to your steering wheel, you will locate its exact position thanks to the instruction manual of your Mercedes Cla.

  • Go through the instructions on the cover of the fuse box to locate the airbag of your Mercedes Cla , it should be noted under the name “airbag” .
  • Take out the fuse cautiously with pliers and verify the state of the filament.
  • If it is defective, replace it with a new fuse, in any other case go to the last section of this content page and verify the power supply to your airbag. As a last solution, you can take your car to your auto mechanic so that he can take a closer look at the trigger of your issue.
  • After you change your car’s airbag fuse, reassemble it and test your lights.

Replacing the relay fuse of the airbag fuse of your Mercedes Cla

Finally, we will now look at how to verify the status of your car’s airbag relay. To get this done, you will need to go to your engine compartment side:

  • Open the fuse box of your Mercedes Cla, it’s near your battery under a plastic cover.
  • Check the inside of the cache for the position of the airbag relay, or your instruction manual if you can’t find it.
  • Reverse the relay with another relay to test your parking lights, or replace it with a new one

You now know how to locate the fuse of the airbag of your motor vehicle , if you are trying to find other fuses like the starter fuse on Mercedes Cla, or the car radio fuse Mercedes Cla, do not hesitate to seek advice from our content articles dedicated to these fuses.

If you need more tutorials on the Mercedes Cla, go to our Mercedes Cla category.