Modern cars are increasingly more pre-loaded with technology and although this provides us comfort, we regrettably also suffer the drawbacks. The majority of us are not comfortable with anything electrical on our Ford Escape, let alone going near the fuses on it. In this article, we will try to help you to solve your fuse problems and specifically to discover the fuse of the airbag on your Ford Escape. To achieve this, first, we will see in which circumstances it can be correct to change the fuse of the airbag of your Ford Escape, then where is the fuse of the airbag of your Ford Escape .
Why change the airbag fuse on Ford Escape?
.
So let’s start our content page on the location of the airbag fuse of your Ford Escape by the interest of changing it. You may have the impression that your fuse is blown but you are not sure. If you discover an airbag light warning on your dash, it is extremely possible that the fuse is the cause. It is essential to know that a fuse works as a security unit to prevent overvoltage on your Ford Escape . It will be a resistor, of a filament, more or less thick, which will let pass a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still undamaged with a simple visual check. In general, one will want to change the fuse of the airbag of a Ford Escape when they don’t operate anymore without reason . If your battery is working correctly, it may be the fuse that is causing your problem.
Where is the fuse for the airbag on Ford Escape?
.
We will now look for the fuse for the airbag in your Ford Escape. The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that controls the proper process of your airbag. We will take it in turns to help you to discover the fuse for the airbag of your Ford Escape .
Replacement of the inner fuse of the airbag of your Ford Escape
.
We will first focus on the inner fuse of your Ford Escape’s airbag. For this you will have to go to the fuse box of your car . If you can’t discover it, know that it is close to your steering wheel, you will discover its exact position thanks to the instructions of your Ford Escape.
- Read the instruction on the cover of the fuse box to discover the airbag of your Ford Escape , it should be mentioned under the name “airbag” .
- Remove the fuse attentively with pliers and check the condition of the filament.
- If it is defective, change it with a new fuse, otherwise go to the last section of this content page and check the power supply to your airbag. As a last remedy, you can take your vehicle to your auto technician so that he can take a closer look at the cause of your problem.
- After you change your car’s airbag fuse, reassemble it and test your lights.
Replacing the relay fuse of the airbag fuse of your Ford Escape
Finally, we will now look at how to check the status of your car’s airbag relay. To achieve this, you will need to go to your engine compartment side:
- Open the fuse box of your Ford Escape, it’s near your battery under a plastic cover.
- Check the inside of the cache for the position of the airbag relay, or your instruction manual if you can’t find it.
- Reverse the relay with another relay to test your parking lights, or change it with a new one
You now know how to discover the fuse of the airbag of your car , if you are trying to find other fuses like the starter fuse on Ford Escape, or the car radio fuse Ford Escape, do not think twice to seek advice from our content articles dedicated to these fuses.
If you wish more tutorials on the Ford Escape, go to our Ford Escape category.
