Modern cars are more and more designed with technology and although this provides us comfort, we unfortunately also suffer the cons. Most of us are not comfortable with anything electrical on our Audi Q2, let alone going near the fuses on it. In this article, we will try to help you to solve your fuse problems and especially to locate the fuse of the airbag on your Audi Q2. To do this, first, we will find out in which scenarios it can be correct to replace the fuse of the airbag of your Audi Q2, then where is the fuse of the airbag of your Audi Q2 .

airbag-fuse-audi-q2

Why replace the airbag fuse on Audi Q2?

.
So let’s start our content page on the location of the airbag fuse of your Audi Q2 by the benefit of changing it. You may have the impression that your fuse is blown but you are not sure. If you discover an airbag light warning on your dash, it is extremely possible that the fuse is the cause. It is necessary to know that a fuse acts as a security device to prevent overvoltage on your Audi Q2 . It will be a resistor, of a filament, more or less thick, which will let complete a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and examine that the filament is still undamaged with a very easy visual check. Generally speaking, one will want to replace the fuse of the airbag of a Audi Q2 when they don’t function anymore without cause . If your battery is functioning properly, it may be the fuse that is causing your problem.

Where is the fuse for the airbag on Audi Q2?

.
We will now try to find the fuse for the airbag in your Audi Q2. The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that regulates the proper procedure of your airbag. We will take it in turns to help you to locate the fuse for the airbag of your Audi Q2 .

Replacement of the inner fuse of the airbag of your Audi Q2

.
We will first concentrate on the inner fuse of your Audi Q2’s airbag. To do this you will have to go to the fuse box of your motor vehicle . If you can’t locate it, know that it is close to your steering wheel, you will locate its exact location thanks to the instructions of your Audi Q2.

  • Go through the instructions on the cover of the fuse box to locate the airbag of your Audi Q2 , it should be noted under the name “airbag” .
  • Remove the fuse carefully with pliers and check the state of the filament.
  • If it is defective, replace it with a new fuse, otherwise go to the last part of this content page and check the power supply to your airbag. As a last remedy, you can take your car to your technician so that he can take a closer check out the cause of your problem.
  • After you replace your car’s airbag fuse, reassemble it and test your lights.

Replacing the relay fuse of the airbag fuse of your Audi Q2

Finally, we will now check out how to check the status of your car’s airbag relay. To do this, you will need to go to your engine compartment side:

  • Open the fuse box of your Audi Q2, it’s near your battery under a plastic cover.
  • Verify the inside of the cache for the location of the airbag relay, or your instruction manual if you can’t find it.
  • Reverse the relay with another relay to test your parking lights, or replace it with a new one

You now know how to locate the fuse of the airbag of your motor vehicle , if you are looking for other fuses like the starter fuse on Audi Q2, or the car radio fuse Audi Q2, do not hesitate to seek advice from our articles dedicated to these fuses.

If perhaps you have any further questions about the Audi Q2, do not hesitate to consult our Audi Q2 category.