When your car is running normally everything is fine, however if it begins to have frequent problems you might start to speculate, specifically if your car won’t start. In this post we will show you where the starter of a volvo v90 is, it will help you to solve your ignition problems. To do this, we will first illustrate the purpose of a starter, then, where is the starter on a volvo v90 , and, at last, how to change the starter of a car.

find-starter-volvo-v90

Function of the starter on your volvo v90

We start this content page by explaining the purpose of the starter motor on your volvo v90. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three main parts:

  • The Solenoid: This part is an electrical relay that will work as a switch, it will be activated by the key of your volvo v90 and let the current from your battery to the engine unit of your alternator.
  • The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your volvo v90 and create enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to send the force from the starter to the engine.

Where is the starter on a volvo v90?

Now that we have quickly detailed what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter located on a volvo v90? It is quite easy to discover a starter, indeed, it is a large part that will almost always be placed in a similar place. We let you discover the two possible places for your car starter below.

Location of the starter on traditional volvo v90

First and most basic circumstance, where to discover the starter of a volvo v90 with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine unit.

Location of the starter to volvo v90 with start and stop

And now second possible starter location of your volvo v90 . This case is much less frequent. It only relates to engines fitted with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. Nevertheless, on some particular series or engines, the starter of your volvo v90 might be integrated in your alternator, it is then called a starter-alternator, to discover it nothing easier, find your accessory belt and you should find out the big starter block.

How to change the starter on a volvo v90?

Finally, we’ll describe to you quite quickly how to change the starter of a volvo v90. This process is not necessarily complex, it can be considered by people who have a lowest of basic mechanical knowledge and adapted tools. Follow below the main steps to perform this intervention:

  • Disconnect the battery on your volvo v90, if you don’t know how to do it, don’t think twice to seek advice from our content page which points out how to do it without taking any risk.
  • After finding your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3
  • .

  • It will be time to disconnect the power cables from the starter motor of your volvo v90, however before doing so we advise you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to take out it you might need to take out parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more guides on the volvo v90, go to our volvo v90 category.