When your car is running normally everything is fine, however if it starts to have frequent problems you may possibly start to speculate, specifically if your car won’t start. In this article we will teach you where the starter of a Volvo V50 is, it will help you to solve your ignition problems. To do this, we will first describe the role of a starter, then, where is the starter on a Volvo V50 , and, at last, how to change the starter of a car.

find-starter-volvo-v50

Function of the starter on your Volvo V50

We start this content page by detailing the role of the starter motor on your Volvo V50. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three most important parts:

  • The Solenoid: This part is an electrical relay that will action as a switch, it will be activated by the key of your Volvo V50 and let the current from your battery to the engine unit of your alternator.
  • The engine unit: Main element of your alternator, it is the one that will drive the flywheel of your Volvo V50 and generate enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to send the force from the starter to the engine.

Where is the starter on a Volvo V50?

Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Volvo V50? It is quite easy to discover a starter, indeed, it is a large part that will almost constantly be placed in a similar place. We let you see the two possible locations for your car starter down below.

Location of the starter on classic Volvo V50

First and most general case, where to discover the starter of a Volvo V50 with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine unit of your car, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.

Location of the starter to Volvo V50 with start and stop

And now second possible starter location of your Volvo V50 . This case is much less frequent. It only relates to engines built with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. Nevertheless, on some specific series or engines, the starter of your Volvo V50 may be integrated in your alternator, it is then known as a starter-alternator, to discover it nothing easier, locate your accessory belt and you should see the big starter block.

How to change the starter on a Volvo V50?

Finally, we’ll explain to you quite fairly quickly how to change the starter of a Volvo V50. This procedure is not actually difficult, it can be considered by people who have a minimum of simple mechanical knowledge and adapted tools. Stick to down below the most important steps to carry out this intervention:

  • Disconnect the battery on your Volvo V50, if you don’t know how to do it, don’t think twice to seek advice from our content page which explains how to do it without taking any risk.
  • After finding your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3
  • .

  • It will be time to disconnect the power cables from the starter motor of your Volvo V50, however before doing so we recommend you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may possibly need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

To get more tips on the Volvo V50, take a look at the Volvo V50 category.