When your car is running normally everything is fine, however if it starts to have regular problems you may possibly start to question, especially if your motor vehicle won’t start. In this article we will learn you where the starter of a Suzuki Sx4 is, it will help you to solve your ignition problems. To get this done, we will first explain the function of a starter, then, where is the starter on a Suzuki Sx4 , and, finally, how to change the starter of a motor vehicle.
Purpose of the starter on your Suzuki Sx4
We start this content page by explaining the function of the starter motor on your Suzuki Sx4. The starter is an electric motor which is powered by your battery, its role will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is consisting of three most important parts:
- The Solenoid: This part is an electrical relay that will act as a switch, it will be activated by the key of your Suzuki Sx4 and let the current from your battery to the engine unit of your alternator.
- The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transmit the force from the starter to the engine.
The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your Suzuki Sx4 and create enough speed for your engine unit to start.
Where is the starter on a Suzuki Sx4?
Now that we have fairly quickly described what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter located on a Suzuki Sx4? It is quite easy to find a starter, obviously, it is a large component that will almost constantly be positioned in a similar location. We let you discover the two possible spots for your motor vehicle starter down below.
Location of the starter on traditional Suzuki Sx4
First and most basic case, where to find the starter of a Suzuki Sx4 with a conventional motor (implied without start and stop). The starter has a particular objective, to start the engine unit of your motor vehicle, for that, it must constantly be near the engine unit flywheel of this one because it is the component that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine unit.
Location of the starter to Suzuki Sx4 with start and stop
And now second possible starter location of your Suzuki Sx4 . This case is much less frequent. It just is about engines equipped with start and stop, and a good component of them will be equipped with a starter positioned close to the flywheel. However, on some particular series or engines, the starter of your Suzuki Sx4 may be included in your alternator, it is then named a starter-alternator, to find it nothing less difficult, identify your accessory belt and you should see the big starter block.
How to change the starter on a Suzuki Sx4?
Finally, we’ll describe to you quite fairly quickly how to change the starter of a Suzuki Sx4. This process is not necessarily complex, it can be considered by people who have a minimal of simple mechanical experience and adapted equipment. Follow down below the most important steps to carry out this intervention:
- Disconnect the battery on your Suzuki Sx4, if you don’t know how to do it, don’t hesitate to consult our content page which points out how to do it without taking any risk.
- After discovering your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Suzuki Sx4, however before doing so we suggest you to take a picture of the set up to avoid making a mistake when reassembling.
- It’s possible that to remove it you may possibly need to remove parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
If you wish more tutorials on the Suzuki Sx4, go to our Suzuki Sx4 category.
