When your car is running normally everything is fine, nevertheless if it starts to have regular problems you may begin to question, specifically if your car won’t start. In this post we will learn you where the starter of a Peugeot 5008 is, it will help you to resolve your ignition problems. To achieve this, we will first illustrate the function of a starter, then, where is the starter on a Peugeot 5008 , and, at last, how to replace the starter of a car.

find-starter-peugeot-5008

Function of the starter on your Peugeot 5008

We begin this article by detailing the function of the starter motor on your Peugeot 5008. The starter is an electric motor which is powered by your battery, its function will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This component is an electrical relay that will action as a switch, it will be activated by the key of your Peugeot 5008 and let the current from your battery to the engine unit of your alternator.
  • The engine unit: Main component of your alternator, it is the one that will drive the flywheel of your Peugeot 5008 and generate enough speed for your engine unit to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transfer the force from the starter to the engine.

Where is the starter on a Peugeot 5008?

Now that we have quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter found on a Peugeot 5008? It is quite easy to locate a starter, in actual fact, it is a large part that will almost always be positioned in a similar location. We let you see the two possible spots for your car starter below.

Location of the starter on traditional Peugeot 5008

First and most common circumstance, where to locate the starter of a Peugeot 5008 with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine unit.

Location of the starter to Peugeot 5008 with start and stop

And now second possible starter location of your Peugeot 5008 . This case is much less frequent. It just is about engines fitted with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. Nevertheless, on some specific series or engines, the starter of your Peugeot 5008 might be included in your alternator, it is then named a starter-alternator, to locate it nothing much easier, identify your accessory belt and you should find out the big starter block.

How to replace the starter on a Peugeot 5008?

Finally, we’ll show you to you quite quickly how to replace the starter of a Peugeot 5008. This process is not actually complex, it can be considered by people who have a minimum of simple mechanical experience and adapted equipment. Follow below the main steps to carry out this intervention:

  • Disconnect the battery on your Peugeot 5008, if you don’t know how to do it, don’t hesitate to consult our article which details how to do it without taking any risk.
  • After finding your starter, loosen the fasteners that hold it in your engine unit block, there will usually be 2 or 3
  • .

  • It will be time to disconnect the power cables from the starter motor of your Peugeot 5008, nevertheless before doing so we recommend you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

To discover more tips on the Peugeot 5008, take a look at the Peugeot 5008 category.