When your car is running normally everything is fine, however if it begins to have frequent problems you may begin to worry, especially if your car won’t start. In this post we will learn you where the starter of a Peugeot 307 is, it will help you to fix your ignition problems. To get this done, we will first summarize the purpose of a starter, then, where is the starter on a Peugeot 307 , and, finally, how to change the starter of a car.

find-starter-peugeot-307

Function of the starter on your Peugeot 307

We begin this article by explaining the purpose of the starter motor on your Peugeot 307. The starter is an electric motor which is powered by your battery, its function will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three main parts:

  • The Solenoid: This component is an electrical relay that will work as a switch, it will be activated by the key of your Peugeot 307 and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Main element of your alternator, it is the one that will drive the flywheel of your Peugeot 307 and generate enough speed for your engine unit to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Peugeot 307?

Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Peugeot 307? It is quite easy to find a starter, obviously, it is a large part that will almost constantly be situated in a similar location. We let you discover the two possible locations for your car starter below.

Location of the starter on traditional Peugeot 307

First and most general circumstance, where to find the starter of a Peugeot 307 with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine unit of your car, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.

Location of the starter to Peugeot 307 with start and stop

And now second possible starter location of your Peugeot 307 . This case is much less frequent. It just relates to engines fitted with start and stop, and a good part of them will be equipped with a starter situated close to the flywheel. Nevertheless, on some particular series or engines, the starter of your Peugeot 307 might be integrated in your alternator, it is then called a starter-alternator, to find it nothing easier, find your accessory belt and you should find out the big starter block.

How to change the starter on a Peugeot 307?

Finally, we’ll describe to you quite fairly quickly how to change the starter of a Peugeot 307. This procedure is not necessarily difficult, it can be considered by people who have a minimal of basic mechanical expertise and adapted equipment. Adhere to below the main steps to perform this intervention:

  • Disconnect the battery on your Peugeot 307, if you don’t know how to do it, don’t think twice to seek advice from our article which points out how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Peugeot 307, however before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more guides on the Peugeot 307, go to our Peugeot 307 category.