When your car is running normally everything is fine, however if it begins to have frequent problems you may possibly begin to wonder, especially if your car won’t start. In this post we will learn you where the starter of a Peugeot 2008 is, it will help you to fix your ignition problems. To achieve this, we will first explain the purpose of a starter, then, where is the starter on a Peugeot 2008 , and, finally, how to change the starter of a car.
Purpose of the starter on your Peugeot 2008
We begin this content by explaining the purpose of the starter motor on your Peugeot 2008. The starter is an electric motor which is powered by your battery, its role will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three most important parts:
- The Solenoid: This component is an electrical relay that will work as a switch, it will be activated by the key of your Peugeot 2008 and let the current from your battery to the engine unit of your alternator.
- The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transmit the force from the starter to the engine.
The engine unit: Main component of your alternator, it is the one that will drive the flywheel of your Peugeot 2008 and make enough speed for your engine unit to begin.
Where is the starter on a Peugeot 2008?
Now that we have quickly described what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Peugeot 2008? It is quite easy to find a starter, in fact, it is a large component that will almost always be situated in a similar location. We let you discover the two possible locations for your car starter down below.
Location of the starter on traditional Peugeot 2008
First and most general circumstance, where to find the starter of a Peugeot 2008 with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the component that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.
Location of the starter to Peugeot 2008 with start and stop
And now second possible starter location of your Peugeot 2008 . This case is much less frequent. It only is about engines equipped with start and stop, and a good component of them will be equipped with a starter situated close to the flywheel. However, on some particular series or engines, the starter of your Peugeot 2008 may be included in your alternator, it is then named a starter-alternator, to find it nothing easier, locate your accessory belt and you should find out the big starter block.
How to change the starter on a Peugeot 2008?
Finally, we’ll show you to you quite quickly how to change the starter of a Peugeot 2008. This procedure is not necessarily complex, it can be considered by people who have a minimum of basic mechanical experience and adapted tools. Follow down below the most important steps to perform this intervention:
- Disconnect the battery on your Peugeot 2008, if you don’t know how to do it, don’t hesitate to consult our content which explains how to do it without taking any risk.
- After finding your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Peugeot 2008, however before doing so we advise you to take a picture of the installation to avoid making a mistake when reassembling.
- It’s possible that to take out it you may possibly need to take out auto parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
To discover more tips on the Peugeot 2008, take a look at the Peugeot 2008 category.
