When your car is running normally everything is fine, however if it begins to have frequent problems you may start to wonder, especially if your car won’t start. In this post we will teach you where the starter of a Peugeot 106 is, it will help you to resolve your ignition problems. To achieve this, we will first describe the role of a starter, then, where is the starter on a Peugeot 106 , and, finally, how to change the starter of a car.

find-starter-peugeot-106

Function of the starter on your Peugeot 106

We start this content page by detailing the role of the starter motor on your Peugeot 106. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three main parts:

  • The Solenoid: This component is an electrical relay that will act as a switch, it will be activated by the key of your Peugeot 106 and let the current from your battery to the engine of your alternator.

    • The engine: Most important element of your alternator, it is the one that will drive the flywheel of your Peugeot 106 and make enough speed for your engine to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Peugeot 106?

Now that we have fairly quickly detailed what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter based on a Peugeot 106? It is quite easy to locate a starter, in actual fact, it is a large part that will almost constantly be placed in a similar place. We let you discover the two possible places for your car starter down below.

Location of the starter on traditional Peugeot 106

First and most common circumstance, where to locate the starter of a Peugeot 106 with a conventional motor (implied without start and stop). The starter has a specific action, to start the engine of your car, for that, it must constantly be near the engine flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine.

Location of the starter to Peugeot 106 with start and stop

And now second possible starter location of your Peugeot 106 . This case is much less frequent. It just is about engines equipped with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. However, on some specific series or engines, the starter of your Peugeot 106 may be included in your alternator, it is then called a starter-alternator, to locate it nothing much easier, find your accessory belt and you should find out the big starter block.

How to change the starter on a Peugeot 106?

Finally, we’ll explain to you actually quite fairly quickly how to change the starter of a Peugeot 106. This procedure is not actually complex, it can be considered by people who have a minimum of simple mechanical expertise and adapted tools. Follow down below the main steps to perform this intervention:

  • Disconnect the battery on your Peugeot 106, if you don’t know how to do it, don’t think twice to consult our content page which explains how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Peugeot 106, however before doing so we suggest you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more tutorials on the Peugeot 106, go to our Peugeot 106 category.