When your car is running normally everything is fine, however if it starts to have frequent complications you might start to question, specifically if your car won’t start. In this post we will teach you where the starter of a Mazda 5 is, it will help you to resolve your ignition complications. To do this, we will first illustrate the purpose of a starter, then, where is the starter on a Mazda 5 , and, at last, how to replace the starter of a car.

find-starter-mazda-5

Role of the starter on your Mazda 5

We start this content by explaining the purpose of the starter motor on your Mazda 5. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three main parts:

  • The Solenoid: This part is an electrical relay that will work as a switch, it will be activated by the key of your Mazda 5 and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Main element of your alternator, it is the one that will drive the flywheel of your Mazda 5 and create enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Mazda 5?

Now that we have fairly quickly explained what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter found on a Mazda 5? It is quite easy to locate a starter, in fact, it is a large part that will almost constantly be placed in a similar location. We let you discover the two possible spots for your car starter below.

Location of the starter on classic Mazda 5

First and most general circumstance, where to locate the starter of a Mazda 5 with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine unit of your car, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine unit.

Location of the starter to Mazda 5 with start and stop

And now second possible starter location of your Mazda 5 . This case is much less frequent. It just concerns engines fitted with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. Nevertheless, on some particular series or engines, the starter of your Mazda 5 may be built in in your alternator, it is then named a starter-alternator, to locate it nothing easier, locate your accessory belt and you should find out the big starter block.

How to replace the starter on a Mazda 5?

Finally, we’ll show you to you actually quite fairly quickly how to replace the starter of a Mazda 5. This procedure is not necessarily difficult, it can be considered by people who have a minimum of basic mechanical expertise and adapted tools. Stick to below the main steps to carry out this intervention:

  • Disconnect the battery on your Mazda 5, if you don’t know how to do it, don’t hesitate to seek advice from our content which explains how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Mazda 5, however before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to take out it you might need to take out auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more tutorials on the Mazda 5, go to our Mazda 5 category.