When your car is running normally everything is fine, nevertheless if it starts to have frequent problems you may possibly start to worry, specifically if your car won’t start. In this post we will learn you where the starter of a hyundai i30 is, it will help you to resolve your ignition problems. To get this done, we will first describe the purpose of a starter, then, where is the starter on a hyundai i30 , and, at last, how to replace the starter of a car.

find-starter-hyundai-i30

Role of the starter on your hyundai i30

We start this article by detailing the purpose of the starter motor on your hyundai i30. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This part is an electrical relay that will act as a switch, it will be activated by the key of your hyundai i30 and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important element of your alternator, it is the one that will drive the flywheel of your hyundai i30 and make enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transfer the force from the starter to the engine.

Where is the starter on a hyundai i30?

Now that we have fairly quickly detailed what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter located on a hyundai i30? It is quite easy to find a starter, obviously, it is a large part that will almost always be positioned in a similar place. We let you discover the two possible places for your car starter down below.

Location of the starter on traditional hyundai i30

First and most basic case, where to find the starter of a hyundai i30 with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine unit.

Location of the starter to hyundai i30 with start and stop

And now second possible starter location of your hyundai i30 . This case is much less frequent. It only relates to engines built with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. However, on some specific series or engines, the starter of your hyundai i30 may be integrated in your alternator, it is then known as a starter-alternator, to find it nothing much easier, identify your accessory belt and you should see the big starter block.

How to replace the starter on a hyundai i30?

Finally, we’ll show you to you quite fairly quickly how to replace the starter of a hyundai i30. This procedure is not actually complex, it can be considered by people who have a minimal of basic mechanical experience and adapted tools. Follow down below the main steps to perform this intervention:

  • Disconnect the battery on your hyundai i30, if you don’t know how to do it, don’t think twice to consult our article which explains how to do it without taking any risk.
  • After finding your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your hyundai i30, nevertheless before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may possibly need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you want more tutorials on the hyundai i30, go to our hyundai i30 category.