When your car is running normally everything is fine, however if it begins to have frequent problems you may possibly start to question, especially if your motor vehicle won’t start. In this article we will teach you where the starter of a Fiat Scudo is, it will help you to solve your ignition problems. To achieve this, we will first illustrate the purpose of a starter, then, where is the starter on a Fiat Scudo , and, at last, how to change the starter of a motor vehicle.

find-starter-fiat-scudo

Function of the starter on your Fiat Scudo

We start this article by explaining the purpose of the starter motor on your Fiat Scudo. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three main parts:

  • The Solenoid: This part is an electrical relay that will act as a switch, it will be activated by the key of your Fiat Scudo and let the current from your battery to the engine of your alternator.

    • The engine: Most important element of your alternator, it is the one that will drive the flywheel of your Fiat Scudo and make enough speed for your engine to start.

  • The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transfer the force from the starter to the engine.

Where is the starter on a Fiat Scudo?

Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter found on a Fiat Scudo? It is quite easy to find a starter, in truth, it is a large component that will almost constantly be positioned in a similar location. We let you see the two possible locations for your motor vehicle starter below.

Location of the starter on traditional Fiat Scudo

First and most general case, where to find the starter of a Fiat Scudo with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine of your motor vehicle, for that, it must constantly be near the engine flywheel of this one because it is the component that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine.

Location of the starter to Fiat Scudo with start and stop

And now second possible starter location of your Fiat Scudo . This case is much less frequent. It only relates to engines fitted with start and stop, and a good component of them will be equipped with a starter positioned close to the flywheel. Nevertheless, on some particular series or engines, the starter of your Fiat Scudo might be integrated in your alternator, it is then known as a starter-alternator, to find it nothing much easier, locate your accessory belt and you should find out the big starter block.

How to change the starter on a Fiat Scudo?

Finally, we’ll explain to you quite fairly quickly how to change the starter of a Fiat Scudo. This process is not necessarily difficult, it can be considered by people who have a minimum of basic mechanical knowledge and adapted tools. Follow below the main steps to perform this intervention:

  • Disconnect the battery on your Fiat Scudo, if you don’t know how to do it, don’t hesitate to seek advice from our article which details how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Fiat Scudo, however before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may possibly need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more guides on the Fiat Scudo, go to our Fiat Scudo category.