When your car is running normally everything is fine, nevertheless if it starts to have frequent complications you might start to question, especially if your car won’t start. In this post we will show you where the starter of a Fiat 500 X is, it will help you to resolve your ignition complications. To do this, we will first describe the purpose of a starter, then, where is the starter on a Fiat 500 X , and, finally, how to change the starter of a car.

find-starter-fiat-500-x

Function of the starter on your Fiat 500 X

We start this article by detailing the purpose of the starter motor on your Fiat 500 X. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three most important parts:

  • The Solenoid: This part is an electrical relay that will work as a switch, it will be activated by the key of your Fiat 500 X and let the current from your battery to the engine of your alternator.

    • The engine: Main component of your alternator, it is the one that will drive the flywheel of your Fiat 500 X and create enough speed for your engine to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transfer the force from the starter to the engine.

Where is the starter on a Fiat 500 X?

Now that we have fairly quickly explained what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter based on a Fiat 500 X? It is quite easy to discover a starter, obviously, it is a large part that will almost always be situated in a similar place. We let you discover the two possible spots for your car starter down below.

Location of the starter on classic Fiat 500 X

First and most common case, where to discover the starter of a Fiat 500 X with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine of your car, for that, it must always be near the engine flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine.

Location of the starter to Fiat 500 X with start and stop

And now second possible starter location of your Fiat 500 X . This case is much less frequent. It just relates to engines equipped with start and stop, and a good part of them will be equipped with a starter situated close to the flywheel. However, on some specific series or engines, the starter of your Fiat 500 X might be built in in your alternator, it is then named a starter-alternator, to discover it nothing less difficult, identify your accessory belt and you should see the big starter block.

How to change the starter on a Fiat 500 X?

Finally, we’ll show you to you actually quite fairly quickly how to change the starter of a Fiat 500 X. This process is not necessarily difficult, it can be considered by people who have a minimum of basic mechanical expertise and adapted equipment. Stick to down below the most important steps to perform this intervention:

  • Disconnect the battery on your Fiat 500 X, if you don’t know how to do it, don’t hesitate to seek advice from our article which explains how to do it without taking any risk.
  • After discovering your starter, loosen the fasteners that hold it in your engine block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Fiat 500 X, nevertheless before doing so we suggest you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you might need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you want more guides on the Fiat 500 X, go to our Fiat 500 X category.