When your car is running normally everything is fine, however if it begins to have frequent complications you may start to speculate, specifically if your motor vehicle won’t start. In this post we will show you where the starter of a Ds Ds 3 is, it will help you to fix your ignition complications. To do this, we will first summarize the function of a starter, then, where is the starter on a Ds Ds 3 , and, at last, how to replace the starter of a motor vehicle.

find-starter-ds-ds-3

Purpose of the starter on your Ds Ds 3

We start this article by detailing the function of the starter motor on your Ds Ds 3. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three most important parts:

  • The Solenoid: This component is an electrical relay that will act as a switch, it will be activated by the key of your Ds Ds 3 and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Main component of your alternator, it is the one that will drive the flywheel of your Ds Ds 3 and bring about enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Ds Ds 3?

Now that we have quickly explained what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter located on a Ds Ds 3? It is quite easy to discover a starter, in fact, it is a large part that will almost constantly be positioned in a similar location. We let you discover the two possible spots for your motor vehicle starter below.

Location of the starter on traditional Ds Ds 3

First and most common case, where to discover the starter of a Ds Ds 3 with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine unit of your motor vehicle, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine unit.

Location of the starter to Ds Ds 3 with start and stop

And now second possible starter location of your Ds Ds 3 . This case is much less frequent. It only relates to engines equipped with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. However, on some specific series or engines, the starter of your Ds Ds 3 may be integrated in your alternator, it is then known as a starter-alternator, to discover it nothing less difficult, identify your accessory belt and you should discover the big starter block.

How to replace the starter on a Ds Ds 3?

Finally, we’ll describe to you quite quickly how to replace the starter of a Ds Ds 3. This procedure is not actually difficult, it can be considered by people who have a lowest of simple mechanical knowledge and adapted tools. Stick to below the most important steps to perform this intervention:

  • Disconnect the battery on your Ds Ds 3, if you don’t know how to do it, don’t hesitate to seek advice from our article which explains how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine unit block, there will generally be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Ds Ds 3, however before doing so we recommend you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to take out it you may need to take out parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you need more guides on the Ds Ds 3, go to our Ds Ds 3 category.