When your car is running normally everything is fine, however if it begins to have regular complications you may begin to speculate, specifically if your motor vehicle won’t start. In this post we will show you where the starter of a Cadillac XT5 is, it will help you to resolve your ignition complications. To do this, we will first describe the role of a starter, then, where is the starter on a Cadillac XT5 , and, at last, how to change the starter of a motor vehicle.

find-starter-cadillac-xt5

Role of the starter on your Cadillac XT5

We begin this article by detailing the role of the starter motor on your Cadillac XT5. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This part is an electrical relay that will action as a switch, it will be activated by the key of your Cadillac XT5 and let the current from your battery to the engine of your alternator.

    • The engine: Most important element of your alternator, it is the one that will drive the flywheel of your Cadillac XT5 and make enough speed for your engine to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transmit the force from the starter to the engine.

Where is the starter on a Cadillac XT5?

Now that we have fairly quickly described what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Cadillac XT5? It is quite easy to find a starter, in truth, it is a large part that will almost constantly be situated in a similar place. We let you see the two possible locations for your motor vehicle starter below.

Location of the starter on traditional Cadillac XT5

First and most basic circumstance, where to find the starter of a Cadillac XT5 with a conventional motor (implied without start and stop). The starter has a specific objective, to start the engine of your motor vehicle, for that, it must constantly be near the engine flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine.

Location of the starter to Cadillac XT5 with start and stop

And now second possible starter location of your Cadillac XT5 . This case is much less frequent. It only is about engines built with start and stop, and a good part of them will be equipped with a starter situated close to the flywheel. However, on some specific series or engines, the starter of your Cadillac XT5 may be built in in your alternator, it is then known as a starter-alternator, to find it nothing much easier, find your accessory belt and you should see the big starter block.

How to change the starter on a Cadillac XT5?

Finally, we’ll explain to you quite fairly quickly how to change the starter of a Cadillac XT5. This process is not necessarily difficult, it can be considered by people who have a lowest of simple mechanical expertise and adapted tools. Stick to below the main steps to carry out this intervention:

  • Disconnect the battery on your Cadillac XT5, if you don’t know how to do it, don’t think twice to consult our article which explains how to do it without taking any risk.
  • After discovering your starter, loosen the fasteners that hold it in your engine block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Cadillac XT5, however before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to take out it you may need to take out auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you wish more guides on the Cadillac XT5, go to our Cadillac XT5 category.