When your car is running normally everything is fine, nevertheless if it begins to have regular complications you may begin to speculate, especially if your car won’t start. In this post we will learn you where the starter of a Cadillac DTS is, it will help you to solve your ignition complications. To achieve this, we will first explain the purpose of a starter, then, where is the starter on a Cadillac DTS , and, finally, how to change the starter of a car.
Function of the starter on your Cadillac DTS
We begin this content page by explaining the purpose of the starter motor on your Cadillac DTS. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is consisting of three most important parts:
- The Solenoid: This part is an electrical relay that will work as a switch, it will be activated by the key of your Cadillac DTS and let the current from your battery to the engine of your alternator.
- The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transmit the force from the starter to the engine.
The engine: Most important component of your alternator, it is the one that will drive the flywheel of your Cadillac DTS and bring about enough speed for your engine to begin.
Where is the starter on a Cadillac DTS?
Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter found on a Cadillac DTS? It is quite easy to discover a starter, in actual fact, it is a large part that will almost constantly be positioned in a similar location. We let you discover the two possible spots for your car starter below.
Location of the starter on classic Cadillac DTS
First and most general case, where to discover the starter of a Cadillac DTS with a conventional motor (implied without start and stop). The starter has a specific action, to start the engine of your car, for that, it must constantly be near the engine flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine.
Location of the starter to Cadillac DTS with start and stop
And now second possible starter location of your Cadillac DTS . This case is much less frequent. It just relates to engines fitted with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. However, on some specific series or engines, the starter of your Cadillac DTS might be integrated in your alternator, it is then called a starter-alternator, to discover it nothing easier, identify your accessory belt and you should find out the big starter block.
How to change the starter on a Cadillac DTS?
Finally, we’ll explain to you quite fairly quickly how to change the starter of a Cadillac DTS. This procedure is not actually complex, it can be considered by people who have a minimum of basic mechanical knowledge and adapted equipment. Stick to below the most important steps to carry out this intervention:
- Disconnect the battery on your Cadillac DTS, if you don’t know how to do it, don’t think twice to seek advice from our content page which points out how to do it without taking any risk.
- After discovering your starter, loosen the fasteners that hold it in your engine block, there will usually be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Cadillac DTS, nevertheless before doing so we suggest you to take a picture of the set up to avoid making a mistake when reassembling.
- It’s possible that to remove it you may need to remove auto parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
If you have any further questions about the Cadillac DTS, do not hesitate to consult our Cadillac DTS category.
