When your car is running normally everything is fine, nevertheless if it starts to have frequent problems you might begin to worry, specifically if your motor vehicle won’t start. In this article we will teach you where the starter of a BMW X1 is, it will help you to solve your ignition problems. To do this, we will first illustrate the purpose of a starter, then, where is the starter on a BMW X1 , and, finally, how to replace the starter of a motor vehicle.

find-starter-bmw-x1

Purpose of the starter on your BMW X1

We begin this content page by explaining the purpose of the starter motor on your BMW X1. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This component is an electrical relay that will action as a switch, it will be activated by the key of your BMW X1 and let the current from your battery to the engine of your alternator.

    • The engine: Most important component of your alternator, it is the one that will drive the flywheel of your BMW X1 and bring about enough speed for your engine to begin.

  • The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transmit the force from the starter to the engine.

Where is the starter on a BMW X1?

Now that we have quickly explained what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter located on a BMW X1? It is quite easy to discover a starter, obviously, it is a large component that will almost always be placed in a similar location. We let you discover the two possible locations for your motor vehicle starter down below.

Location of the starter on classic BMW X1

First and most general case, where to discover the starter of a BMW X1 with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine of your motor vehicle, for that, it must always be near the engine flywheel of this one because it is the component that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine.

Location of the starter to BMW X1 with start and stop

And now second possible starter location of your BMW X1 . This case is much less frequent. It only relates to engines equipped with start and stop, and a good component of them will be equipped with a starter placed close to the flywheel. Nevertheless, on some particular series or engines, the starter of your BMW X1 might be built in in your alternator, it is then called a starter-alternator, to discover it nothing easier, find your accessory belt and you should discover the big starter block.

How to replace the starter on a BMW X1?

Finally, we’ll show you to you quite quickly how to replace the starter of a BMW X1. This process is not necessarily difficult, it can be considered by people who have a lowest of simple mechanical experience and adapted tools. Follow down below the main steps to carry out this intervention:

  • Disconnect the battery on your BMW X1, if you don’t know how to do it, don’t hesitate to consult our content page which points out how to do it without taking any risk.
  • After discovering your starter, loosen the fasteners that hold it in your engine block, there will usually be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your BMW X1, nevertheless before doing so we advise you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to remove it you might need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

In the event that you have any further questions about the BMW X1, do not hesitate to consult our BMW X1 category.