When your car is running normally everything is fine, nevertheless if it begins to have regular complications you may possibly start to speculate, specifically if your car won’t start. In this post we will learn you where the starter of a Audi S3 is, it will help you to fix your ignition complications. To get this done, we will first explain the purpose of a starter, then, where is the starter on a Audi S3 , and, at last, how to change the starter of a car.
Purpose of the starter on your Audi S3
We start this content by explaining the purpose of the starter motor on your Audi S3. The starter is an electric motor which is powered by your battery, its function will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is consisting of three most important parts:
- The Solenoid: This part is an electrical relay that will act as a switch, it will be activated by the key of your Audi S3 and let the current from your battery to the engine unit of your alternator.
- The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to send the force from the starter to the engine.
The engine unit: Main component of your alternator, it is the one that will drive the flywheel of your Audi S3 and bring about enough speed for your engine unit to start.
Where is the starter on a Audi S3?
Now that we have fairly quickly described what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter based on a Audi S3? It is quite easy to discover a starter, obviously, it is a large part that will almost always be positioned in a similar location. We let you discover the two possible locations for your car starter down below.
Location of the starter on traditional Audi S3
First and most general case, where to discover the starter of a Audi S3 with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.
Location of the starter to Audi S3 with start and stop
And now second possible starter location of your Audi S3 . This case is much less frequent. It just concerns engines equipped with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. Nevertheless, on some particular series or engines, the starter of your Audi S3 may be integrated in your alternator, it is then named a starter-alternator, to discover it nothing less difficult, identify your accessory belt and you should discover the big starter block.
How to change the starter on a Audi S3?
Finally, we’ll show you to you quite fairly quickly how to change the starter of a Audi S3. This process is not necessarily complex, it can be considered by people who have a minimum of simple mechanical experience and adapted tools. Stick to down below the most important steps to perform this intervention:
- Disconnect the battery on your Audi S3, if you don’t know how to do it, don’t hesitate to consult our content which details how to do it without taking any risk.
- After discovering your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Audi S3, nevertheless before doing so we advise you to take a picture of the set up to avoid making a mistake when reassembling.
- It’s possible that to take out it you may possibly need to take out auto parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
In the event that you have any further questions about the Audi S3, do not hesitate to consult our Audi S3 category.
