The safety of a car is important. Whether or not the Volvo Xc40 are economic holes, certain maintenance acts are indispensable. In this article we will explain to you when to change the brake discs of your Volvo Xc40? To get this done, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Volvo Xc40, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Volvo Xc40
We begin our guideline by detailing what the brake discs of a Volvo Xc40 are used for, it will allow you to figure out why it is necessary to make sure that they are always in good functioning order.
Brake discs are the main component of your braking system. In fact, braking on an Volvo Xc40 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will trigger your Volvo Xc40 to brake.
When to change the brake discs of a Volvo Xc40?
We will now proceed to the part that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Volvo Xc40? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Volvo Xc40 , nevertheless it is necessary to know that dependent on your driving style and the type of journey this can vary significantly. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, on the other hand, if you only drive in built-up areas, it can reduce.
- A simple and good technique to find out the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual technique to know when to change the brake discs on your Volvo Xc40 is to remove the wheels after the car has been set on stands. Once taken out, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Volvo Xc40?
Finally, to end this content we will fairly quickly describe how to change the brake discs of your Volvo Xc40. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Volvo Xc40, don’t think twice to consult our content which explains you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Volvo Xc40 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To find more tips on the Volvo Xc40, take a look at the Volvo Xc40 category.
