The safety of a car is essential. Even if the Volkswagen Crafter are financial holes, certain maintenance actions are essential. In this article we will explain to you when to change the brake discs of your Volkswagen Crafter? To achieve this, to begin with, we will see what the brake discs of your car are used for, then, when to change the brake discs of your Volkswagen Crafter, and, finally, how to change them with new ones.

change-brake-discs-volkswagen-crafter

Interest of the brake discs of a Volkswagen Crafter

We begin our content page by explaining what the brake discs of a Volkswagen Crafter are used for, it will allow you to figure out why it is important to ensure that that they are constantly in good working order.
Brake discs are the main component of your braking system. In actual fact, braking on an Volkswagen Crafter is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Volkswagen Crafter to brake.

When to change the brake discs of a Volkswagen Crafter?

We will now proceed to the part that certainly attracts you to this content page, namely, when changing the brake discs of a Volkswagen Crafter? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now detail the different ways to know when to change them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Volkswagen Crafter , nevertheless it is important to know that dependent on your driving style and the type of journey this can vary significantly. Indeed, if you mainly drive on the motorway and your brakes are just slightly used, this value can increase, in contrast, if you just drive in built-up areas, it can reduce.
  • A simple and powerful method to identify the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A simple visual method to know when to change the brake discs on your Volkswagen Crafter is to remove the wheels after the car has been set on stands. Once removed, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to change the brake discs on your Volkswagen Crafter?

Finally, to end this content page we will fairly quickly explain how to change the brake discs of your Volkswagen Crafter. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Volkswagen Crafter, don’t think twice to consult our content page which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Volkswagen Crafter on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

To get more tips on the Volkswagen Crafter, take a look at the Volkswagen Crafter category.