The safety of a motor vehicle is paramount. Even if the Toyota Land Cruiser Serie 90 are economic holes, certain routine service works are crucial. In this article we will explain to you when to replace the brake discs of your Toyota Land Cruiser Serie 90? To achieve this, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Toyota Land Cruiser Serie 90, and, finally, how to replace them with new ones.

change-brake-discs-toyota-land-cruiser-serie-90

Benefit of the brake discs of a Toyota Land Cruiser Serie 90

We start our content page by detailing what the brake discs of a Toyota Land Cruiser Serie 90 are used for, it will allow you to discover why it is important to ensure that that they are always in good functioning order.
Brake discs are the main part of your braking system. Obviously, braking on an Toyota Land Cruiser Serie 90 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Toyota Land Cruiser Serie 90 to brake.

When to replace the brake discs of a Toyota Land Cruiser Serie 90?

We will now proceed to the section that most certainly attracts you to this article, namely, when replacing the brake discs of a Toyota Land Cruiser Serie 90? How we mentioned it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now highlight the different solutions to know when to replace them:

  • We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Toyota Land Cruiser Serie 90 , however it is important to know that based on your driving style and the type of journey this can change considerably. Indeed, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can decrease.
  • A basic and successful way to find out the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A basic visual way to know when to replace the brake discs on your Toyota Land Cruiser Serie 90 is to remove the wheels after the car has been set on stands. Once taken out, you will be able to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Toyota Land Cruiser Serie 90?

Finally, to end this article we will quickly describe how to replace the brake discs of your Toyota Land Cruiser Serie 90. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Toyota Land Cruiser Serie 90, don’t think twice to consult our article which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Toyota Land Cruiser Serie 90 on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If perhaps you have any additional questions about the Toyota Land Cruiser Serie 90, do not hesitate to consult our Toyota Land Cruiser Serie 90 category.