The safety of a motor vehicle is essential. Even if the Suzuki Sx4 are financial holes, certain routine service actions are crucial. In this article we will explain to you when to change the brake discs of your Suzuki Sx4? To achieve this, to begin with, we will find out what the brake discs of your car are used for, then, when to change the brake discs of your Suzuki Sx4, and, finally, how to replace them with new ones.
Interest of the brake discs of a Suzuki Sx4
We begin our content page by explaining what the brake discs of a Suzuki Sx4 are used for, it will enable you to understand why it is essential to be sure that they are always in good working conditions.
Brake discs are the most important part of your braking system. Indeed, braking on an Suzuki Sx4 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will cause your Suzuki Sx4 to brake.
When to change the brake discs of a Suzuki Sx4?
We will now move on to the section that most certainly attracts you to this article, namely, when replacing the brake discs of a Suzuki Sx4? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two components are wearing parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Suzuki Sx4 , however it is essential to know that according to your driving style and the type of journey this can vary significantly. In truth, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, in contrast, if you only drive in built-up areas, it can decrease.
- A basic and effective technique to identify the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A basic visual technique to know when to change the brake discs on your Suzuki Sx4 is to remove the wheels after the vehicle has been set on stands. Once removed, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Suzuki Sx4?
Finally, to conclude this article we will fairly quickly explain how to change the brake discs of your Suzuki Sx4. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Suzuki Sx4, don’t think twice to consult our article which exposes you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Suzuki Sx4 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you want more tutorials on the Suzuki Sx4, go to our Suzuki Sx4 category.
