The safety of a motor vehicle is essential. Even if the Suzuki Swift are financial holes, certain routine service acts are vital. In this article we will explain to you when to replace the brake discs of your Suzuki Swift? To do this, to begin with, we will find out what the brake discs of your car are used for, then, when to replace the brake discs of your Suzuki Swift, and, finally, how to change them with new ones.
Benefit of the brake discs of a Suzuki Swift
We begin our article content by detailing what the brake discs of a Suzuki Swift are used for, it will enable you to understand why it is essential to be sure that they are always in good functioning order.
Brake discs are the main component of your braking system. In fact, braking on an Suzuki Swift is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Suzuki Swift to brake.
When to replace the brake discs of a Suzuki Swift?
We will now proceed to the part that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Suzuki Swift? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now outline the different ways to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Suzuki Swift , nevertheless it is essential to know that depending on your driving style and the type of journey this can vary significantly. In fact, if you specifically drive on the motorway and your brakes are just slightly used, this amount can increase, in contrast, if you just drive in built-up areas, it can reduce.
- A simple and good way to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A simple visual way to know when to replace the brake discs on your Suzuki Swift is to remove the wheels after the car has been set on stands. Once taken off, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Suzuki Swift?
Finally, to conclude this content we will quickly explain how to replace the brake discs of your Suzuki Swift. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Suzuki Swift, don’t hesitate to consult our content which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Suzuki Swift on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To get more tips on the Suzuki Swift, take a look at the Suzuki Swift category.
