The safety of a car is important. Regardless if the Peugeot 5008 are economic holes, certain maintenance acts are vital. Today we will explain to you when to replace the brake discs of your Peugeot 5008? To do this, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Peugeot 5008, and, finally, how to replace them with new ones.


Benefit of the brake discs of a Peugeot 5008

We start our article by explaining what the brake discs of a Peugeot 5008 are used for, it will allow you to figure out why it is important to be sure that they are constantly in good working conditions.
Brake discs are the main part of your braking system. Indeed, braking on an Peugeot 5008 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will trigger your Peugeot 5008 to brake.

When to replace the brake discs of a Peugeot 5008?

We will now proceed to the section that most certainly attracts you to this content, namely, when replacing the brake discs of a Peugeot 5008? How we described it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now outline the different ways to know when to replace them:

  • We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Peugeot 5008 , nevertheless it is important to know that based on your driving style and the type of journey this can vary considerably. In fact, if you specifically drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can reduce.
  • A basic and effective method to identify the state of the brake discs on your car is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A simple visual method to know when to replace the brake discs on your Peugeot 5008 is to remove the wheels after the car has been set on stands. Once taken out, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.


How to replace the brake discs on your Peugeot 5008?

Finally, to end this content we will fairly quickly explain how to replace the brake discs of your Peugeot 5008. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Peugeot 5008, don’t hesitate to seek advice from our content which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Peugeot 5008 on stands, take off the wheels you want to action on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

To find more tips on the Peugeot 5008, take a look at the Peugeot 5008 category.