The safety of a car is essential. Whether or not the Peugeot 308 are economic holes, certain routine service actions are vital. In this article we will explain to you when to replace the brake discs of your Peugeot 308? To get this done, first of all, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Peugeot 308, and, finally, how to change them with new ones.
Interest of the brake discs of a Peugeot 308
We begin our article by explaining what the brake discs of a Peugeot 308 are used for, it will allow you to discover why it is important to be sure that they are constantly in good functioning conditions.
Brake discs are the main part of your braking system. Indeed, braking on an Peugeot 308 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will bring about your Peugeot 308 to brake.
When to replace the brake discs of a Peugeot 308?
We will now proceed to the section that most certainly attracts you to this content, namely, when changing the brake discs of a Peugeot 308? How we described it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to change them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Peugeot 308 , however it is important to know that depending on your driving style and the type of journey this can change considerably. In fact, if you mainly drive on the motorway and your brakes are just slightly used, this value can increase, in contrast, if you just drive in built-up areas, it can reduce.
- A simple and successful technique to identify the state of the brake discs on your car is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A very easy visual technique to know when to replace the brake discs on your Peugeot 308 is to remove the wheels after the vehicle has been set on stands. Once taken off, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Peugeot 308?
Finally, to end this content we will quickly describe how to replace the brake discs of your Peugeot 308. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Peugeot 308, don’t think twice to consult our content which points out you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Peugeot 308 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To find more tips on the Peugeot 308, take a look at the Peugeot 308 category.
