The safety of a motor vehicle is paramount. Whether or not the Peugeot 208 are financial holes, certain routine service works are indispensable. Today we will explain to you when to change the brake discs of your Peugeot 208? To do this, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Peugeot 208, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Peugeot 208
We begin our guideline by explaining what the brake discs of a Peugeot 208 are used for, it will allow you to discover why it is necessary to ensure that they are constantly in good functioning order.
Brake discs are the most important part of your braking system. Obviously, braking on an Peugeot 208 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Peugeot 208 to brake.
When to change the brake discs of a Peugeot 208?
We will now proceed to the section that most certainly attracts you to this content, namely, when changing the brake discs of a Peugeot 208? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two components are wearing auto parts and they will, as time passes and especially the friction when braking wears out and loses braking power. We will now highlight the different ways to know when to replace them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Peugeot 208 , however it is necessary to know that dependent on your driving style and the type of journey this can vary considerably. In fact, if you mainly drive on the motorway and your brakes are only slightly used, this amount can increase, alternatively, if you only drive in built-up areas, it can reduce.
- A basic and successful method to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual method to know when to change the brake discs on your Peugeot 208 is to remove the wheels after the vehicle has been set on stands. Once taken out, you will be able to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Peugeot 208?
Finally, to conclude this content we will quickly explain how to change the brake discs of your Peugeot 208. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Peugeot 208, don’t hesitate to seek advice from our content which explains you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Peugeot 208 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To get more tips on the Peugeot 208, take a look at the Peugeot 208 category.
