The safety of a motor vehicle is very important. Even if the Peugeot 1007 are financial holes, certain maintenance acts are fundamental. In this article we will explain to you when to replace the brake discs of your Peugeot 1007? To achieve this, first of all, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Peugeot 1007, and, finally, how to change them with new ones.

change-brake-discs-peugeot-1007

Interest of the brake discs of a Peugeot 1007

We begin our article content by detailing what the brake discs of a Peugeot 1007 are used for, it will allow you to figure out why it is necessary to make sure that they are constantly in good functioning order.
Brake discs are the main component of your braking system. In actual fact, braking on an Peugeot 1007 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Peugeot 1007 to brake.

When to replace the brake discs of a Peugeot 1007?

We will now move on to the section that undoubtedly attracts you to this article, namely, when changing the brake discs of a Peugeot 1007? How we described it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to change them:

  • We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Peugeot 1007 , nevertheless it is necessary to know that dependent on your driving style and the type of journey this can vary considerably. In truth, if you mainly drive on the motorway and your brakes are only slightly used, this amount can increase, on the other hand, if you only drive in built-up areas, it can reduce.
  • A simple and successful way to find out the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A simple visual way to know when to replace the brake discs on your Peugeot 1007 is to remove the wheels after the car has been set on stands. Once removed, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Peugeot 1007?

Finally, to conclude this article we will fairly quickly explain how to replace the brake discs of your Peugeot 1007. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Peugeot 1007, don’t hesitate to seek advice from our article which points out you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Peugeot 1007 on stands, take off the wheels you want to action on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If you want more tutorials on the Peugeot 1007, go to our Peugeot 1007 category.